what did you and your mk3 leon do today

[cairus]

Thanks to @cairus I upgraded my MIB unit so it also have borders with ambient colors!

Firmware is still 0480 No Firmware 05XX

 

[Craig.]

Which Software is installed?

1701 currently

 

[nd-photo.nl]

Went for a tour with some like minded people in the south of the Netherlands. Around the Maastricht / Valkenburg area with all the small villages along the way

At the first stop in the morning (grey, foggy, cold)

And this is more like it, somewhere in the hill area around Valkenburg (sunny & warm!)

Location: https://maps.app.goo.gl/pwLNiGW2WnW7rsdx5

 

[tracktoy]

Had a good track day on friday and another one on Wednesday so did a bit of housekeeping

Emptied and cleaned out the Catch Can (I did it on Friday miday but more gunk after the afternoon session.

Replaced the Perspex window liner (its very old and had got brittle and cracked) lucky the replacement has a lifetime warranty (although I will probably have forgotten all about it by the time I need it again)

Fitted new Air Filter

After Wednesday track day I shall be putting motor in for DSG, Front Diff service and Oil Change / Filter clean

 

[nd-photo.nl]

Just posted the video guide for installing the Rieger Tuning diffuser on a prefacelift Seat Leon Cupra

 

[Mo_86]

Just posted the video guide for installing the Rieger Tuning diffuser on a prefacelift Seat Leon Cupra

Forgot to ask this a while ago but do you have slight play in the diffuser near the number plate?

 

[nd-photo.nl]

Forgot to ask this a while ago but do you have slight play in the diffuser near the number plate?

I will check for you today, but I don't think I have any play/rambling sounds with regards to the diffuser

 

[nd-photo.nl]

@Mo_86 Checked, I have 0 play with the Rieger diffuser If you have some play, double check if the "plated nuts" are in the correct position. They might need to be pushed a little bit more towards the front of the car?

 

[Mo_86]

Both sides are solid its literally just the part by the number plate it moves a little, the teeth are all in the current position however they maybe could have been a touch longer.

 

[grabania]

Active TPMS completed!



And here how is looks when pressure is too low:

 

[tracktoy]

The old girl is still going strong and showing lots of motors the way to go.

 

[nd-photo.nl]

@tracktoy What a cool picture

 

[v11boy]

The ST can carry a mattress on Thule roof rails if anyone needed to know - mini truck tie connected over the top, through the rear windows

 

[nd-photo.nl]

I love how the smoke exits the tailpipes after parking, looks so cool

 

[Mo_86]

I love how the smoke exits the tailpipes after parking, looks so cool

Looks like its smoking some good dutch

 

[nd-photo.nl]

Looks like its smoking some good dutch

Hahahaha

 

[nd-photo.nl]

Posted a new howto video: how to replace the camshaft position sensor on the EA888 Gen3 engine

 

[Craig.]

Finally got around to fitting the 790A virtual cockpit, not finished coding it yet but something occurred to me...

I don't think I've seen a set with a black trim instead of chrome, before I dive on ETKA: Did they even do one for those with black trim? Or are they all chrome?

 

[cairus]

Finally got around to fitting the 790A virtual cockpit, not finished coding it yet but something occurred to me...

View attachment 54153

I don't think I've seen a set with a black trim instead of chrome, before I dive on ETKA: Did they even do one for those with black trim? Or are they all chrome?

I personally only know of chrome for this part number. However, I have an idea and will get back to you about it.