312mm

are they 288mm oe 312mm? Been offered a 312mm setup for £150

I'm concidering doing the mod of putting TT brakes on I've read the sticky thread but it doesn't seem to say any where just HOW much better it is with the bigger brakes on ?? I personally think the brakes are quite good on the FR no problems after a couple of track days and a few sub 10 min...

Hi folks I have a 130tdi bora that is fitted as std with 288x25mm front brakes - pretty sure lots of ibiza's and leons also have them so this may be of interest to other people There are numerous threads out there about this conversion, some people use different calipers and others use the...

Hi all, Does anyone have any links to someone doing the whole brake conversion kit for my PD130? Surprisingly fleabay doesn't seem to have anything... so far I've found http://www.fabia-vrs.com/312mmkit.htm - which I intend to ask about there's also this lot...

Hi, i looking at buying the 312mm brake upgrade and dont fancy doing the job myself!? i was wondering if anyone knows somewhere close to Dartford/Gravesend that would fit it for me for a decent price?? Hon

the vrs has stung me for a few hundred quid already this year so i am having to go poverty spec on new discs. they are worn pretty much as low as should be allowed,but i am skint. cheap and cheerful replacements,standard or groovy ones

BRAKE DISC. 312mm ON THE FRONT 256mm @ REAR I saw this on ebay and was wondering if anyone has bought off this fella. Have you heard of these brakes before. Are they worth the hassel or should i do a runner. i was gonna stick the redstuff on them for my christmas present...

There are lots of people now getting the TT 312mm disc/calepers upgrade. What are the pro's to getting this? Are the calepers any more powerfull? I know the discs are bigger wich means the braking surface is bigger bit its not by much. Also being 5 stud you have to drill the disc, is this safe...

Hi chaps, well changed my 312's discs and pads about 2 months ago now, and they are warped already, quite bad :( (im not too bothered as i only payed around £50 all in as i got them at cost through work, so not a massively exspensive mistake )when you brake and take your hands off the steering...

hi just fitted my 312mm setup and everything is good pedal feels good only one question they are slightly steeming with a slightly funny smell on them is this just the coating on the disk being burnt off or them getting very hot at the pads arnt settled in properly yet? thanx for any...

ive seen a set of audi tt calipers disks and driveshafts from and x reg tt and was woundering if all the tt's have the 312mm set up? the calipers are the ones from the 312mm as i can see the wire retainer on them which the 288mm calipers dont have. im asking this as my dads leon 130 se has these...

Hi, Would need to know if the TT/S3 calibers everyone is using in their Ibiza's labeled ATE 54? I'm looking for a set of bigger brakes and getting some caliber marked ATE 54, out of an 1.8T 132kw version, no knowledge of what car though.. Thanks..

I've just called direct line up to get the final word on my new brakes for the fabia. I had previously told there would be a cost for upgrading to the 312mms(cross drilled zimmermans). However, I’m now being told there is no 'category' for brake upgrade, therefore there will be no charge, just...

Ok after having my milltek system and FMIC fitted to my car I starting to think I should really upgrade the brakes before the remap as its very fast for the upgrades I have done! Infact I know I should because at the minute they just arent up to the job! As its an Ibiza 100Pd everything is...

But they wont bleed properly :censored: very very spongy, the only way i could think of is with the old fashioned method. Mine is a Golf( should be same as Leon). im told i need a pressure bleeder or the dealer. Is there any way manually to do it or do i need the pressure bleeder or dealer...

Some pics of the 312mm setup fitted to my car this weekend. I bought the discs, calipers, carriers and pads from golfturbo.com (Ebay auction) for £225. Not the cheapest I know but the supplied brakes are, for all intents and purpose, brand spanking new. From an Audi TT 225 shipped direct...

Today I finally got round to fitting the 312mm brake conversion that I bought off Ian (aceman) ages ago... The other weekend I cleaned up the calipers and discs with my drill and wirebrush attachment, then finally bought some fluid today so no longer had an excuse ! Easy job, took about 2...