bolts

Ok lads, I was having the annoying 17536 (system too lean) problem for quite a while putting me into constant limp mode. Finally bought a new maf which cleared that problem. However I am still running limp, now due to 17965 (positive deviation or overboost as I read on here). This fault...

Hi to all.My Brother in law has a Leon Cupra R,2004/54.He has lost the locking wheelbolt adapter.Seat have most un helpfull.£50 for a new set + parts & labour to remove bolts. It is the male spline type.Are these all different on each Cupra??The only reason i ask is i cant seem to see many...

As the title suggests....this is a very annoying problem...especialy if some monkey of a tire fitter has rounded off your locking wheel bolts off. Which is exactly the problem I found myself with today. But as it may happen to other people in the future....here is what I did to fix it. As...

Hi guys, Just got my INA track density dogbone mount through and just need to order the correct bolts now. I believe i need stretch bolts? Just spoke to Seat and need to check exactly which ones i need... there seems to be 5 holes on my bracket, see the attached picture: 1: Right...

Hi,done a quick search but cant really find the info i am looking for, can anyone tell me the wheel bolt size on a 04 LCR, is it 5x100 ? Thanks,Chris.

does anyone know where i could get shorter wheel bolts as my spacers screw into the hub and then the wheel screws into the spacer just

hi my bolts keep coming loose on my manifold, im now on my 3rd gasket, is there anything i can do to stop this happening, (only checked em a few days ago but then came loose within days) seen something on one of the threads that looks like it locks the bolts down but when i try n explain to...

Can someone tell me if OZ Superleggeras need tapered wheel bolts? My wheels have the standard wheel bolts at the minute but they arent tapered standard? Not only do i have standard wheel bolts, but i have 5mm spacers on the rear and the rear hubs have damage to the threads bit worried!!

I'm looking to replace the current bolts that were issued with the 40mm (20mm each side) hubcentirc spacers from FK automotive as they're rather rounded and beaten. Had a look on europerformance and venommotorsprt but had no luck......so yes, please help. Bolts are 42mm in length and are...

Hi all, Have pickup my Upper and Lower strut brace from Audi. The only fitments I have been given with the two braces are 8 'Riv nut' type things I know a few of you have fitted the upper brace with M10 or M12 bolts, has anybody had one fitted with Riv nuts!? if so any difference? I've...

Tried to remove the downpipe today, appears the bolts are seized, turns a bit then just feels like it's cross threading. Any tips or tricks to save me having to drill them out?[:@]

What socket is it to remove the headbolts on the BAM engine? i tried torx and m10 - m12 spline and no luck starting to irritate me now

Hi, I have just (painfully) removed the armrest from my LCR. Referring to this picture: http://www.cupra.net/Leon/Mein_Cupra/MAL/MAL_13.JPG Look directly at the picture above, the left hole mounted on an existing bolt using a nut, whereas the right two holes seem to mount to the chassis...

Any help would be appreciated

new question: how many newtonmeter to use when fastening the downpipe to the turbo ? im about to change my downpipe with a 3" 42 Draft Designs downpipe with magnaflow sportcat and have some quick questions should the nuts and washers on the turboflange be replaced?

I am planning on doing my cam belt on saturday but was just reading a guide on VW vortex and it said that the engine mounting bolts that bolt it to the chassis are stretch bolts. It also says to replace the bolts on the autodata instructions. Does anybody know the part numbers for these bolts...

ok done the search and gave up, rite im rebuilding the front setup of the steering and surspension on the ibiza and got new bolts, wish bones, track rod ends etc... only thing is i need the strut bolts thats hold the coilover to the hub (the 2 bolts that you can adjust the camber) so i need...

I decided to put the borbet A's on today even though they need refurbishing, as they were taking up too much room. Anyway pulled off the stock wheel on the front passenger side and applied the 5mm spacers that the guy at the alloy shop recommended, but the last bolt kept turning. So i got a...

have read on here a while ago that the manifold bolts come loose. im just wondering if mine have come loose. i had a forge tip fitted last week so it might just be a new sound im experiencing but underload going up hill in say fourth or fifth at 30 to 40 mph i get what sounds like a blowing...

Hello, I ordered 10mm spacers for my 05 LCR on OEM alloys, i also ordered radius bolts for them and below is what i got, they look tapered to me, can any confirm this before i try to fit them? Thanks in advance