cat

Here's one i made earler today , got the bits off good old ebay and a local shop. Hi-flow sports cat 100cell = £90 ( ebay ) 1 meter 2mm x 2.5" and 1 meter 2mm x 2.25" stainless tubing = free ( scrap bin at cybox exhaust's ) 3 flange's and lamba boss = £10 ( cybox exhaust's ) Took off...

Dont seem to have heard the definitive gain in BHP & torque by fitting a cat-back Milltek exhaust. Just checked some old threads, didnt seem too helpful, as alot have replacement cats, dowmpipes etc. Got a remap on the car, and now, wondered if anyone has had rolling road tests of before &...

Hey guys been looking at the miltek cat and downpipe for the cupra but just wondered if it will actually fit to my supersprint exhaust? James

ive ben thinking i should weigh my cat in as its just sat in the garage gathering dust.ive got no plans of using it again and im keeping my car untill it dies as cant afford a new 1 at the mo.would it be worth selling or should i justscrap it?

hi guys would like to know if this would fit my cupra . mine is on a Y plate 01 with engine code AUQ its the usual 1.8t 20v thanks very much the add was saying 2002 on is there a difference:confused:

As above where is the cat located in the toledo 110 1.9tdi. Is it in the downpipe? or located along the straight section on the underside of the car?

I reckon I'm going to get one of the above. Can anyone share their experiences of these exhausts or maybe recommend something different? Thing is, I'm a bit past my Peco days and want something on the quieter side. (It's not a Saxo).

currently have a piper cat back exhaust..now looking to purchase the matching sports cat and downpipe..this is for a remaped 1.8t (not r). has anybody got any feedback for this either negative or positive. any ecu issues with regard to the better spool up. best place to purchase this system.

:phi have the standard cupra r exhaust on my leon just wondered if i bought a de-cat would this change the sound of the exhaust thanks rick

Just about to order teh above part and can save quite a bit if I don't have it fitted by the dealer. Therefore has anyone fitted one and are there any problems. I have access to a ramp so access won't be a problem.

Well after my thread last night asking whether I should remove the cat to inspect , after finding it rattled a lot, I took it off today. As you can see from the photos , the cat has collapsed inside and the debris I managed to shake out . Some of the lumps of cat were wider than the pipe...

Removed my exhaust today as its leaking at 2 joints. While I was taking it off the CAT/Downpipe seemed to wobble a lot , but I put this down to the flexi allowing it to do so. While I moved it around I could hear the CAT rattling as if there were stones inside it - in other words the CAT may...

Hi As a cheap alternative to trying to find a downpipe & decat that fit properly and dont cause error codes; would there be much to be gained by buying a second hand cat for the ibiza cupra, gutting it and swapping it over with the original cat (till MOT time obviously)? Does the...

Been on here for ages now, finally getting my first mod in the next few days, so thought I might aswel start a thread! Here goes, here it is; Thats as it stands now. really need to get Mr_Dave out with his SLR to get some decent ones. AP coilovers should be with me in the...

can any please shed some light on my problem:( mk3 ibiza cupra, st1 revo'd,forge dv, fmic, twister induction kit, few days ago whilst drivin on the motorway aprox 60 - 70 mph my car ( 2001 ibiza cupra) started to splutter and normally peaks at 18 psi now only gets to 5 psi, triple checked...

got my twin kitties taken out and had a 100 cell high flow sports cat put in...i was told i would see a minimum of 15bhp increase and a lot nicer sound. i havent noticed any performance gain, and the exhaust sounds exactly the same as it did before...apart from a slight different tone in the...

[:@]I have just spent all day working on my ibiza, including trying to remove my Cat to solve my exhaust blowing issues. Can someone please tell me how to get the buggar out! I have removed my whole exhaust system, the 5 nuts (sheared one) attaching the cat to the manifold but the engine part...

hi was wondering if anyone could help need to get a new exhaust from the cat back and was thinkin bout gettin a miltek, but cant decide whether to go for the twin pipe like i have now or the cupra r lookin one, if neone has ne pictures wuld b grateful and ne ideas of a reasonably priced place to...

just a d cat pipe and down pipe on my mk 3 ibiza cupra custom code stage one ruining fmic,jetex system,forge tip,green cotton filter,forge 007p,since i had d cat pipe and down pipe on car started runing abit rough.will i need stage two remap on it to run right?

My mate has just got his Corsa VXR back from Thorney Motorsport after having a stage 2 remap, exhaust and sports cat fitted (now runs 222.3bhp) and after being out in it and hearing what it sounds like im looking at doing stuff to mine now!! What i want to know is, are there any companies out...