coding

Hi everyone, I have a 2018 Seat Leon MK3 ST (estate), Full-LED version. Unfortunately, my headlight switch doesn't have the AUTO position, so I don’t have automatic headlights. However, there is a sensor mounted behind the rearview mirror on the windshield – possibly a rain/light sensor. Also...

Hi all, I have a Seat Leon 5f pre-facelift from 2016. From factory it didn't come with a RHLS, so I retrofitted one. I did some coding I found on other forums here, and the automatic lights and wipers work perfectly. I do sometimes have issues with the humidity sensor, but I think this is...

Hey, is it possible to code TSR into my Cupra Formentor V1 manual via OBD 11, if anyone can share the code or path what to do, that would be awsome. I do in fact have ACC and travel assist camera.

Hi all, Following advice on this forum, i started doing a proper retrofit for auto lights for my pre facelift seat leon mk3 st. The car had no climatronic, so the rearview mirror didn’t have the mounting point for the sensor. I used a plastic adapter from aliexpress to attach to the windshield...

Hi, I have a 2015 Seat Leon FR Technology with LED headlights. A few months ago I started to notice condensation in the drivers side headlight. Soon after, my light started flickering and showing up warning lights on the dash. While I have managed to remove the condensation, the headlight has...

Does anyone know if it’s possible to code the steering wheel controls to stay on until the key is removed? I find myself staying in the car listening to music with ignition off quite often and it’s very annoying that I have to use the MIB to skip songs instead of using the controls on the...

I changed my power steering pump yesterday as I’ve had an intermittent power steering problem where the light would come on and the steering go stiff, usually when I’m driving. I changed the pump but the light has stayed on and the steering is still stiff, is this a matter of coding or something...

Hi all, This is my first post here, let me know if I break any rules I don’t know about. I wanted to install RGB footwell lights in my pre-facelift Leon mk3 (i think it’s pre-facelift as it’s from January 2017) and read that before any coding and stuff i need to have a compatible BCM. I have no...

Hi, I bought a car and the headlight was damaged and not with the car. I ordered a replacement with another set of modules and from my understanding, it needs recoding. When I start the car the beam works but not the high beam or indicators and from what I have seen, this is because it needs...

Hello ! I have the Car Scanner app and a Viecar ELM 327 v1.5 Bluetooth 4.0. I would like to enable SEAT’s Traffic Sign Recognition on my 2014 Leon 5F. On the car scanner website MQB Coding, they state the following : I don't how how can I get my camera model and also which one to use. I...

Morning all, I've searched the forum and couldn't find an answer. Recently had my 2018 seat Leon cupra 4drive ST for a couple months now, and a couple bits I need sorting with coding. For example headlight sensor to be reset after coilovers being fitted as get error messages occasionally...

Hi All, I have a Leon Cupra R 1.8T 2005. Couple of weeks ago, my original remote key stops working, I only have one at this point. I have tried absolutely every re-syncing procedure, including the adaptation in VCDS and the procedure in the owners handbook. Nothing works. (The key can still...

Hallo Anyone got their brake lights to flash both outer and inner on the tailgate? Also other coding / adaptations that’s a must to do? Seat Leon FR 2016 - with LED

2nd day of owning my Seat (absolutely love it btw). My old Fiesta 2016 used to have DRL’s that activated when you unlock, is this possible on the Leon at night? Just curious as it would look so much better. Also - Would it need to be activated using the in vehicle menu or coded? I have a Carly...

Hi All, I’m picking up my Seat Leon MK3 tomorrow. It’s a 1.4 engine. Seen lots of posts on here regarding car coding and wanted to ask a question about coding. I currently have a MyCarly device, full app access etc and have managed to apply Needle Sweep to a friend car as well as refuel...

I have been messing around with trying to code leds to the footwell lights but didn’t work , I have now put in the stick bulbs and need the stock coding settings for them to work . If anyone could send them to me would mean a lot thanks For a seat Leon 2013

I bought these led footwell lights off eBay (https://www.ebay.ie/itm/W5W-5050-501-RGB-Remote-Control-Car-LED-Side-Light-6SMD-Colorful-T10-Wedge-Bulb/333576117268) but when I installed them I realized they didn't work. after some research, I found you have to code then and so I copied what...

Hi everybody are welcome and I write this thread for helping everybody to make mods on your cars (Seat Ibiza 2019). I write here but I have tested in my Italian forum www.Ibizatuningclub.com all of these encodings written here. I ask to all of you to help me to discovered new codes and to have...

Just thought I would post up the VCDS mods that I know work on the Facelift Leon with Virtual Cockpit. For reference - These were all proven on a Leon Cupra 300 sc - MY18 - Virtual Cockpit For reference - I use a genuine Rosstech Hex-CAN cable with the latest VCDS software. Display Drive...

Hi guys & gals, Another guide for you today for a convenience feature more than anything. This used to come standard, but then Seat changed it to only come with the 'Winter' pack. However, it can be retrofitted! So I will show you how to do this yourself. For this job you are going to need some...