levels

Just looking to see what boost and timing levels (and with what modifications) you guys are running with for Revo Stage 1 remap. At the moment I'm running, - Boost = 7 - Timing = 6 And running on Tescos finest super unleaded (99 ron) with 007p dv and drilled airbox. Cheers

Hi guys, just a quick one, what sort of boost is your k03s producing at what revs. Mineis at around 20psi at 4k then drops quite quickly to 11psi for rest of the revs!!

Sorry if its been asked before. Just simply want to know the max each turbo is able to flow. I have a standard KO3 which boosts to 12psi and holds in 1,2 gear. And in 3,4,5 gear is boosts to around 16psi and holds it to the redline. Mate of mine says my standard turbo should not be able...

Checked my oil level as I do every so often and noticed it sitting higher than i'd usually have it. When cold, the level is sat just above the top bend of the dipstick on my mk1 leon. I turned the engine on and let it idle for 10 minutes or so just now, and re checked after. The level has gone...

Hi all, Just wanted to know... at what power levels do you need to start thinking about changing the Intake Manifold on a 1.8T (225) engine? Thanks

Hi all, Just wondered how you know when your washer level is full. I have only just looked under the bonnet at this and noticed it's just a pipe going to god knows where. I can't see a tank like in my old cars so when do you know when to stop???? Ta from the typical woman!!!!:rolleyes:

After doing a few searches, i am suprised to learn that TDi's run such hich boost, standard ~20-25 Psi / remapped ~ 30 psi:blink: my query is, what is the max boost a PD130 turbo and associated parts will run at regularly / reliably? :shrug:

My car is currently in the garage following a front end bump, but its taking forever to get sorted because apparently they are waiting on a few parts from Seat which they say are on back-order.. Is it usual for seat to have such low levels of parts, I would of thought they would keep front...

Hi all, I did a bit of searching and could only find the information on a cupra R. Question's are....whats the standard boost on a k03s from the factory? And whats a safe max boost to run the k03s at? I have the following mods on my car. ITG panel filter in smooth airbox Forge TIP...

Ive never really had to touch coolant system in any of my cars but is this normal?. I posted a question about coolant the other day because my light was flashing and bleeping and when i checked the level it was a fraction below the minimum so i added a drop to make it just above the min level...

hello, my mates got a fairly std cupra, he has ind kit and cat back system, we were wondering if its poss to giv the boost a little tweek without having a remap? not on about silly increase's in boost levels just enough to giv it that little bit more if you get me lol mite have a fmic...

Right fitted my new gauge over weekend but not sure what levels to expect. What seems to be happening is its rising to 15psi then quickly dropping to 12 then slowly sinking to 10. Now is this normal if not amy idea what could be causing this? Sorry if someone has posted with this but I cant...

Hi folks, I have a k04 mk3 ibiza with decat, genesis 380cc, forge cooler, LCR maf & tube! wondering if you can help me? :confused: i took my car to red dot obd tuning today to get my ibiza remapped. The guy said yeah he could get 270hp or thereabouts but when i arrived it was 240 and i...

i run a completely standard cupra R and was jus wondering what the turbo should boost to?only hitting 0.5 psi but a few mates are saying it should be at least 1?please help!

Hi im fitting my k03s tomorrow and i am wondering what boost level i should expect, My car hasnt been mapped as of yet so after what i have read i should be alright for me to drive around with it on unmapped. I have the following engine mods 007 Dump Valve, N75J Valve, Smoothed AirBox With 4"...

HELP.....i think my car is :censored: !!! On new years eve i got a warning on the dash that my engine was over heating, looked at temp and it was at 130 (normally 90) i pulled over and checked coolant level there was a tiny amount in it!!! Refilled it just about 2mm passed the max mark and...

Had to put a pint of water into the water system a couple of months back.. As it is now getting rather frosty I was wondering if there is a way of checking if the coolent/antifreeze level is strong enough ???