loom

Hi there, I am unlucky to have pranged my FR Tdi. Although the body has been fixed parts of the near side body loom is damaged and a couple of plugs missing which the auto-electrician says he needs else he don't know which wire will go where. It's taking a while to find the section of loom...

Can a fellow mk2 Owner do me a favour if it isnt too much hassle. Cant you check the above in your car and tell me roughly where it runs. Reason I ask is that I have a cigarette lighter to fit in the car from a mk2 and in the fusebox there is the fuse for it and a wire coming from the...

Is there any difference between a cordoba sx wiring loom and an ibiza gti wiring loom? there the same engine (2.0 16v ABF) so should be the same right? cordoba just has a boot?! Thanks, Kyle

Hello, in need of advice! Can anyone tell me if the wiring loom from a mk3 vw golf abf gti is exactly the same as a mk2 Ibiza gti abf?! Thanks!

Hi Guys, Just brought myself a Leon cupra tdi 150 42k on it, and im well impressed with it! Just one thing bugging me, i drove nearly 300 miles at the weekend and when in trafffic on the motorway not once did the rad fans kick in, the temperature doesnt budge from halfway at 90oc but just...

My leon didnt have fog lights as standard, but when i put my bumpers on they have got the fogs in them. Does anyone know if the wiring loom for the fogs is on the car hidden away or will i have to get them? I know i will have to get the switch but thats nothing to worry about yet any...

Hi, Not being very technically minded, I'm trying to sort out a changer for my ibiza, some people have been talking about a loom that may or may not pre-exist in the car already. I have no Idea of what this is or what it should look like. Does anyone have any ideas? If anyone has a picture...

Morning Guys quick question... are the headlight looms for all the leons the same? on the cupra r the loom goes into the ecu is this the same on all leons or just specific to the cupra r?

Hi guys. I've started the conversion to the afternmarket ECU. But I'm stuck on the identity of one of the connectors. It is the only one that has a siver rubber cover. It is near the speed sensor. And pin colours are :Purple/White, Brown, Yellow/Black. It's don't seem to be in the...

Hi guys. I've started the conversion to the afternmarket ECU. But I'm stuck on the identity of one of the connectors. It is the only one that has a siver rubber cover. It is near the speed sensor. And pin colours are :Purple/White, Brown, Yellow/Black. I'm thinking it's Reverse...

hi i bought the cruise control stalk for my leon (bargain at £15 from a scrappy) i have had the cruise activated by the fantastic guys at 'the motorist centre' in canterbury i was wondering if anyone knew where i could buy the loom the part number is 1J0 971 425 however when i search for...

My mate has a ovni cupra 2001 model engine code AUQ can anyone tell me if this has the wiring loom to enable the trip computer? If not how do you get this working?

Hi Does anybody know whether you need a wiring loom if you replace the standard stereo with a different stereo such as a pioneer (about 2yrs old) the garage that i usually take my cars to reckon i need this as the vehicle was registered after march 2006, my car is a seat ibiza 1.9tdi 2006 reg...

My CD multichager is not working as there is no feed coming from the loom part no 1M2 971 735.I have traced the loom from the glovebox where it connects to the changer to the passenger footwell area and noticed a wire that branches off the loom with a 8 pin blue housing not connected to any...

Any of you guys thinking of putting cruise control into your leon will need this cable thats on ebay just now... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180073823685 Just thought you should know its there...

Well, finally (and I do mean finally) the whole engine side loom is out of the car. Everything I need from the fusebox back is out now. doesn't look that daunting (given that I took it out it helps...) THe reason it's taken me so long is the healing time from slicing my hands open each...

Is the cupra engine loom totally seperate from the interior loom? How easy does it come out of the bay?