metal

Hi folks First time poster and long time lurker here. I was recently fitting a dash cam to my mk3 Leon and had a panel underneath the glovebox unscrewed. A little metal fitting fell out. I couldn't see where it would go back in. I've attached some pictures of it to see if anyone has any idea...

Anybody know the cheapest place to get one of these as going to do my cambelt in the next couple of weeks and want to change this at the same time.

Anyone got some recommendations?

.

Currently fitting my forge tip and have been for 3 hours now How do you put the metal line onto the metal nipple on the tip?? its impossible because the nipple is in a completely different place to the standard tip (typical of an aftermarket part) any ideas?? Ive also had to fit this...

When braking it sounds like my pads are worn and the metal is grinding against the discs. Checked brake pads but are fine .. only had car 6months so not too worn down. Would changing pads/discs anyway be an idea ? or is it simply just giving it a good clean if ther anything causing this...

Good evening just a quick one. Does anyone know where I can get legal metal pressed plates from in essex. I dont really want too send off my documents cos we all know how good the royal mail is. I dont mind traveling a little but not too far. Thanks in advance rob :think:

hi, i tried to replace the gear gaitor but couldn't remove the knob because of this metal clip around it someone have any clue how can i get rid of it??? and once i remove it , do i have to buy a new one from the dealer ? thanks

Can you order up a new FR with gun metal colour alloys at all do any of you guys know? Cheers in advance :)

Hello, Today when I tried to put my passenger side window down all I could hear was a crunching noise! So when I removed the door card I seen that the cable on the motor was broken:cry:!! Basically I need to know how to get the metal inner panel off of the door, I have took out all the bolts...

Hi I just wondering if anyone can recommend a good place to get some pressed metal number plates from. I bought a set years ago for my golf. Cheers

Evenin'! After fighting with a tight fit for my Milltek exhaust, I ended up unbolting that thin piece of metal running across the middle of the car underneath. Since it's not very sturdy I ASSUME it's not needed to add to the rigidity of the car? It's just there to catch the exhaust in case...

Hi, I searched the web for Mk1 metal mesh grille to no avail. I mean the upper front grille (the center one, though I don't mind buying all 3 upper grilles). Any idea where I can find this grille? Thank you, Alon

Does anybody other than Allard's do a metal pipe upgrade for the PD150? I have a Leon FR+ PD150 with the SFS boost hoses and they have started to rub and wear holes through to the second layer. I want to upgrade to the metal pipework, meant to be a worthwhile upgrade but Allards quoted me at...

im going to be fitting my intercooler soon but i need to know what size is the metal pipework and where can i get some metal pipework from so i can work out what i need any links or websites please cheers

Does anyone know where i can get a hold of these fuses ? the ones that sit on top of the battery, i need a 40amp one for my radiator, i tried halfords but they are as useful as a hedgehog in a condom factory id ideally like to get it 2moro if not il wait till monday and get my wee bro to get 1...

Hi, Got a 52 1.2 ibiza and the passenger window has stopped working - stuck down. I assume the regulator is knackered but to check i need to get to it. I'm having trouble removing the metal panel which allows access to the regulator / window etc. I have: removed the door card removed...

Evening all I've managed to get a metal pancake pipe from a seat leon cupra 1.8t 180bhp model. Looking at pics on the Internet of it, it did look very restrictive, but now seeing it in person, it is actually like twice the size of my plastic pancake pipe. Now what do I need to do to fit this...

Hi all do you know if you can buy a metal plate for the front drivers side mat, the heal plate. i did find one but have lost it where i found it lol. it had the R logo in. does anyone know where i can find it?

been reading a lot on this site and i was just thinking how can i tell if i have got a water pump with plastic or metal ? on looking at all the paperwork with the car (collect it on thursday) the cambelt was done just 3k ago but nothing on paperwork about waterpump.