poss

Hiya all Fitted so new ds2500 pads and some discs from badger about 2 weeks back and there just not feeling that great, no where near as good as i would have expected and have done just over 300m on them, did the bedding in procedure and warm them up but still no massive improvement on old...

hello all great site, this is my 3rd V5 its a 2001 Y plate bought it 3 days ago and i seem to think the clucth has colapsed . at low speed in 1st or reverse am getting a vilant judder evan with my clutch fully pressed in , then every now and again it will not come out of gear the clucth...

Since having my LCR remapped ive been loving the extra power and like a kid with a new toy i take every opportunity to give it a blast that was up until Wednesday evening whilst coming back from the petrol stsation I put my foot down for a bit of dual carriage way fun and whilst you could here...

Sorry about the rather abrupt title! :) Im going to pick up some NGK BKR7E's from the local motorfactors after work (in about an hour); but do I leave them at the standard gap, or have them regapped?? Also, if it the latter; what is the gap I need to have them set at? I have read it should be...

Hello I recently aquired a VERY Large cold air feed pipe to give my K&N induction kit more air to breath! To put it into perspective the pipe supplied was probably about 50mm dia, this pipe is 105mm dia. and of course before i put it on, i must consult trusty ol' SCN! ;) with this increase in...

Since i brought my car the drivers side mirror has been dull, so as its such a nice day and ive gave the car a good clean im gunna try and sort this out as well. the paint work on the mirror is very dull and rough to touch ive tryed polishing it before but it refuses to come out like the rest of...

Sorry for the vague title! I have had a mk3 cupra before, now selling my 106 GTI and looking for another MK3 but i'm not sure as the ones i'm looking at aren't 'perfect' so possibly looking at a mk2! What are they like in comparison to the mk3 cupra? What luxuries do the have? And...

Is it possible to fit two dump valves to a cupra engine? The reason i ask is because on my punto turbo it was possible to put one dump valve pre intercooler and one post intercooler. What i was thinking of doing was keeping my forge 007p in the standard position and fitting a second atmos dump...

Since having stg1/2 ive noticed that the car sometimes fells really flat. Looking back through some block 118 logs (2K>6k in 4th) The n75 goes from 0% > 99.2% almost instantly. Heres a bit of a shitty log snippet, but anyway .... rpm,intake,n75,boost 3400 24 82.4 1930 3600 23 87.5 2160 3840...

Hi there guys, got probs with my car at the moment, drove up to yorkshire the other day and whilst driving up noticed a loss of power, the next day the diagnostic light came on, the one that looks like the engine/turbo diagram. I have been to the seat dealer and they have plugged it into the...