Adrian Flux insurance services - discount for forum members.
  • Hey Guest💡👉 We have just launched our new Dealer Directory and review service Find out more now

refitting

  1. Cupra R side skirt removal and refitting

    has anyone removed and refitted a Cupra R side Skirt - how do the plastic clips work do they break when they are romoved are new clips required for refitting? cheers chris
  2. Poundie

    2 Problems: 1 touch window buttons and clutch pedal refitting...

    Hi all, Im having so much trouble with this clutch pedal im refitting, ive got the pedal on, the white nylon sleeve that sits inside the box on the pedal which commenly snaps wont clip onto the 'plunger' which engages the clutch, do you put it on the plunger first then put the pdeal on over...

  3. Guide for the removal and refitting of a HPFP

    Is there a step by step guide for the above, please? Also, where is the fuel filter on a 2008 Leon Cupra?
  4. Lewis225

    Re-fitting bumper

    Hi, yesterday i fitted a fmi to my lcr, after putting light back in I came to try and put the front bumper back on, with the help of a mate and about two hours of trying we gave up. Nothing is fouling but I can't get the bumper to slide into the rails behind the lights, they start to catch the...
  5. RossIBIZATDI

    CV Joint - Re-fitting Clip (the big one)

    Hi all, Whilst I had the wheel off the other day I noticed my CV clip was off! Have bought a new one from DMS and acquired some tile cutters from my neighbour as well as some CV Joint grease from Halfords but have 3 questions: - 1. Do I need to flush the joint out to get rid of any grit...
  6. pstables

    Cupra Engine Cover Removal / Refitting HELP!

    Hi All, just struggled to get the engine cover off to replace the air filter, took the engine cover apart to fit the filter all fine, reassembled said cover - fine. Now the time to pop the engine cover back on and it doesn't. No amount of effort seems to be able to put the cover back on. Any...
  7. kewe

    Refitting Dial Needles

    Hi, I need to know the correct method for re-fitting the needles for my gauges (speedo,revs,temp and petrol). Having removed them and refitted them to '0' they seem to go through some calibration procedure when the power is put back on to the speedo unit and end up in the wrong place. I have...
  8. warren_cox

    Leon Mk2 Wing Mirror - refitting it

    Hi A mate of mine called me this morning to say that she's knocked the wing mirror off her car reversing through the gate of her house. Its currently just hanging on by a cable. She called the dealer and hey said they would need to replace the entire wing mirror unit even though the casing...
  9. blackie

    FMIC - refitting mesh

    I have done a search!! :rolleyes: When i got to forge next week to get my intercooler fitted, i know i wont be able to refit the standard mesh. Some people have used the halfords black plastic mesh instead and it gives a really good look like this (sorry to whoevers pic this is, but great...
  10. freddy_t

    Re-fitting standard ECU

    In my cupra I upgraded my ecu for one with a re-map on but kept standard ecu also. Now looking to put my old ecu back in then fit k03s and all the other goodies required and get a custom map for stock ecu then sell my spare remapped ecu. However wondering if i need vag-com to do so? when i...

  11. Refitting OE Exhaust

    Has anyone refitted their LC OE exhaust system after removing it to have a performance one? Its been cut to get it off the car so will need a sleave to re-fit. I believe (but i'm not sure) that when SEAT replace the backbox or whatever, that they obviously have to cut the exhaust but that...

  12. URGENT - Re-fitting of Bosch DV

    O.K. fitting the Forge was a piece of piss. I now need to re-fit the Bosch (Selling the car) How do you go about connecting the the top hose. There is not enough room to fit any jubilee clip because there is a greater recess! Any ideas would be appreciated. Cheers
Top Bottom
Back