uprated

Dont know if you ibiza PD130/160 boys have seen this yet, but the lovely people at Jabbasport have developed this: Its a uprated dogbone mount.. originally for the Fabia vRS, but will fit the TDI Ibizas too.. the standard part can wear and add a little bit too much driveline "shunt" - ive...

How much wud it cost for me to buy and uprated friction disk and it to be fitted on my seat ibiza sport pd130? also is this the best option for my slipping clutch? the car has done 86k but had a new clutch at 40k with the previous owner. The clutch slip is such a pain because it happens...

Looking at changing cams on an IHI big port engine to get more power at the top end but I suspect the engine is held back more by the turbo than the cams. Anybody tried alternative cams (back to back) and what gains did they get ? Thanks Bernard

Does anyone know any places in and around the Colchester area that can fit the uprated drive disc which i will be getting from Allards in a week or so? The best price i have found so far is £170 + VAT from a garage in Ipswich. Also am i right in thinking that a drive disc is the same as...

Since lowering my car on Weitech springs & shocks, i've gone through two sets of anti roll bars at the front, the lower suspension just seems to put too much strain on the bolts holding them on to the point where they get so loose they knock, and the bolts just don't bite when trying to tighten...

Anyone got any preferences on what dump vavle i should get for my 180 cupra? looked at the ones on awesome-gti.co.uk and i'm not sure. would quite like flutter sound rather than a huge dump of air but we'll see i guess. also i wanna uprate my speakers in all doors, mid range first then maybe...

im think of getting some uprated plugs Denso IK22 Iridium does any one know if these are any good or has anyone fitted any thanks

Hello all! I have a 225mm clutch at the mo which I assume is standard on the AYP block, I have been looking for clutch kits but not sure what to get... I need a flywheel aswell. I have seen some kits from the u.s but they are 228mm..... would this fit if I got the whole kit i.e clutch and...

Got ibiza fr tdi 130 and need uprated hoses they have blew off twice now and had them replaced twice some 1 gonna please design uprated 1's

just wandering if you can get a better gasket than the standard one you can buy for a fiver? looked on various sites and haven't come across one? cheers

Go this fitted yesterday and I've been driving like a granny (easier said than done) since then. What's the best way to go about bedding it in?

Had my flywheel replaced yesterday as I had a nasty tapping noise when the car was idle, new flywheel sorted that and it now idles perfectly :) Whilst the gearbox was out I had the Sachs organic clutch disc fitted to replace my OEM disc, I already have the Sachs uprated pressure plate. So...

the cupra has just come back from it rip off 30k service and they have advised my turbo internals are going! so ive been looking around everywhere for a turbo upgrade thats not too pricey! got a quote from jbs for the jbs04 turbo stage2 without clutch upgrade for £2985.10p thats with custom map...

Looking for anyones wisdom relating to this. My car is going in to Kim Collins QST in March and I was looking to get the uprated Haldex controller from the RS4 fitted to the S3. This should provide a more rear wheel drive experience and I believe in normal conditions biases the split to...

hi guys, ive got a 2003 1.6 leon sx. The clutch is on its way out after quite a bit of abuse! does anyone know where i can get an uprated clutch and roughly how much they are? also where can i get a "short shifter" and how much are they? Ive searched google but ebay has taken over! lol and i...

does anyone know where to get decent exhaust rubbers? my blueflame system keeps making one break and the garage said you can get heat resistant ones and that they're orange?? I suggested puting a jubilee clip around the rubber but the guy reckoned it would effect the exhausts...

Could anyone recommend a clutch for a cupra sport please?!?! I'm fed up of it being sticky :(

Hi chaps, well changed my 312's discs and pads about 2 months ago now, and they are warped already, quite bad :( (im not too bothered as i only payed around £50 all in as i got them at cost through work, so not a massively exspensive mistake )when you brake and take your hands off the steering...

I've just bought a Polo GTI, and as far as i can see it is the same suspension wise as the Latest Ibiza. Anyway, who makes uprated anti-roll bars kits? Eibach or H&R? I've got eibachs on My MK2 Golf GTI and they are superb, and am keen to uprate the ones on the Polo. Cheers Andy

Most of the chips for TFSI powerplant put out at least 240PS. Why then, when the manufacturer does it as in the new Cupra, do they need to uprate the conrods, pistons, head etc. Makes me very worried about getting a standard motor chipped as surely this would suggest it can't take the...