0-60 and bhp of your mk3 ibiza's after mods

[ConradJellyfish]

Just thought id put a thread up to see what results people are getting from the modifications to their ibiza's.

We all spend alot of money and time on our cars, just thought it was worth seeing how much more performance in figures you get for your cash.

Most people will have had there car rollling roaded so will have a power figure, and im guessing alot of people will have run 1/4 mile's, thus having 0-60 and 1/4 mile times.

So simply list;

model ibiza
power after mods
0-60
1/4 mile
how much you think you have spent

and the modifications you did to get these figures.

Cheers J

 

[ibiza_95]

mk2 ibiza with 1.8T conversion
260bhp ish
0 - 60 - 6.2 secs
not done a qtr mile yet

could also do with using some decent tyres on the timed runs... that was timed at silverstone

 

[Mat]

how have you measured 0-60 time? is it accurate?

i know more people have 1/4mile figures than they do 0-60 figures

 

[ibiza_95]

i did it at silverstone at trax, there was a 0-60 sprint run

 

[Dan1.6]

seat ibiza 1.6 sport
100bhp (actually addded weight though)
10.21 (slowest 10 seconeds of my life)
not done one yet

 

[cupra_jobe]

Seat ibiza mk3 Hybrid turbo
280 bhp
0-60 dunno around 5 i would guess
Spent around 3000k i rekon maybe slightly more really dont wanna think about it haha

 

[Danny_B]

Mk3 Ibiza Cupra
KO3S CC phase 2 etc
243bhp / 277ftlbs
0-60 - never timed properly
1/4 mile - 14.1 @ 100mph on budget tyres

 

[DaNnY_LaD]

Mk3 Ibiza cupra
IHI Vf23 Revo Stage 3 ect
330bhp / 300ftlbs Est
0-60 - never timed properly maybe 6?
1/4 mile - 13.0 est....
Cost £3860 just on Engine & Conversion

Shall soon see on fiqures..

 

[ibiza_95]

Seat ibiza mk3 Hybrid turbo
280 bhp
0-60 dunno around 5 i would guess
Spent around 3000k i rekon maybe slightly more really dont wanna think about it haha

youd be lucky to get 5 secs... my mate with a 4wd celica GT4 with 280ish bhp got 5.1

 

[pj1985]

My old IHI did 5secs dead measured on the Liquid Gauge. When Bill mapped it months before I got the gauge he said it felt just as fast as his original IHI which he said recorded 5sec 0-60 when at a PVW thrash so if you dont have any way of measuring your 0-60 get Bill to take you out as he is pretty accurate! lol

 

[PhilW]

I got a 2.1 60ft and 14.2 when the car was running like cr, not done a 0-60 in years even tho i have proper timing equipment, need to do it again soon.

Last time i done it i got 6.47 on stage 1 with a fmic, supersprint cat back and dynatwist.

 

[Finan]

1.0 ibiza (50bhp)
no mods (gettin induction kit) (53bhp )
0-60 - 18secs(i think)
not done
spent 30euro on a splitter

 

[gazcuprablk]

a had 0-60 in 5.2 secs at gti international and 13.6 sec 1/4 mile 3 times, last time it was rolling roaded it was 278bhp and overfueling, now i have forged rods and decent clutch aiming for 340bhp and under 13secs 1/4 mile after some weight loss. car and mods owes me well in excess of 8k ( jus made me think why am i doin it)

 

[cupra_jobe]

youd be lucky to get 5 secs... my mate with a 4wd celica GT4 with 280ish bhp got 5.1

that car is alot heavyer and with sticky tyres on a dry track i dont think i am to far off was only a guess though!

 

[45_CB]

http://www.youtube.com/watch?v=sW-F9m2dQbM

My old cupra.... AmD remap, jetex filter, Miltek cat back

 

[s1l3nc3r]

1.8 20v T

200.4 bhp and 248 ftlbs on AMD rollers "unadapted map"...got my front mount cooler on now though so maybe more...

Never tried to time it.

Never done it but around 14-15 est.

About 1100-1200...

Mods in sig.

 

[revo20vtdan]

1.9 20vt

461bhp 390ftlbs dynopack and maha rollers
never done quarter or 0/60 since fitting the gt30 only done a top speed run 183mph with increased rev limit and extended final drive, with gps system

to many mods to list spent around 18k all good fun

 

[ibizacupra]

My old IHI did 5secs dead measured on the Liquid Gauge. When Bill mapped it months before I got the gauge he said it felt just as fast as his original IHI which he said recorded 5sec 0-60 when at a PVW thrash so if you dont have any way of measuring your 0-60 get Bill to take you out as he is pretty accurate! lol

must be my calibrated butt dyno



pre gt35 it runs now, mine was racelogic vbox 0-100mph in 8.4sec
will see what its does again when it reassemble it

 

[20 valve ted]

mine went on rolling road on sat for 1st time made 211.8bhp and 252 torques.
running stage 2 revo, 3" dp decat and 2.5" straight through, all silicone hoses except tip, ebay fmic, k&n typhoon intake n249 bypass. happy with the result, is it average for mods?
did 1/4 mile with same mods before re map and got 14.84s.
using app on iphone it estimated 215bhp and said 0-60 was 5.9s

 

[ibiza_95]

for an iphone app thats absolutely amazing... technology eh