0-60 and bhp of your mk3 ibiza's after mods

[Spud_G40]

Fastest at Inters 0-60 was 5.98 standard wheels/suspension too much power lol.

 

[cupra_jobe]

mine went on rolling road on sat for 1st time made 211.8bhp and 252 torques.
running stage 2 revo, 3" dp decat and 2.5" straight through, all silicone hoses except tip, ebay fmic, k&n typhoon intake n249 bypass. happy with the result, is it average for mods?
did 1/4 mile with same mods before re map and got 14.84s.
using app on iphone it estimated 215bhp and said 0-60 was 5.9s

whats the app called sounds interesting

 

[20 valve ted]

think it was pocket dyno.... maybe. i just searched for dyno and found it. its only free version so you can only do 5 runs but alright for nowt. it said my friends mk4 tdi fr 130 was 203bhp

 

[JayCho]

mods- milltek cat back with custom decat
green dynatwist induction kit
cc phase 1 remap

199.0 bhp @ 252ftlb
0-60 - never timed

 

[s370]

last years 4.0 seconds to 60, not ibiza tho lol

 

[ian_cupra]

Hybrid k03s with all mods except exhaust mani
249bhp and 285 lb/ft
0-60 - dunno never really done one
1/4 mile - 13.1 @ 110mph
not sure on spends, a fair bit though

 

[cupra_jobe]

249 sounds quite low for a hybrid mate how come?

 

[ian_cupra]

no manifold, and its mapped to last

 

[cupra_jobe]

ah ok fair one

 

[haller]

My ibiza 1.4 8v - 60 bhp . 12 seconds 0- 60

Hoping to remap, with air filter and exhaust system and some other treats i can get hold of hoping for 100 bhp

 

[cupramillo]

Save on doing any power mods mate and stick to handling ones, then save for a cupra

 

[evans1089]

How does that App work on iphone? Do you drive onto the phone lol?

 

[-=Rob=-]

Just seen this thread, interesting iPhone app, may have to take a look

Heres mine anyway:

Mk3 Ibiza Cupra
Revo Stage 2 on standard K03 Turbo with supporting mods, plus 2.25deg of timing
212bhp / 270lbft of torque
0-60 - Hmmm, no idea!
1/4 mile - As above

 

[Andywarr]

my old Ibiza which now belongs to Rogers was running about 195 bhp, Basically had an APR Remap and a Full Milltec, ran 0-60 in 6.01 and 1/4 in 14.86, that was at inters in 04 or 05, im pretty sure there timing setup was wrong as that 0-60 seems quick compared to some much higher bhp cars

 

[RabReith89]

1.9 20vt

461bhp 390ftlbs dynopack and maha rollers
never done quarter or 0/60 since fitting the gt30 only done a top speed run 183mph with increased rev limit and extended final drive, with gps system

to many mods to list spent around 18k all good fun

Wot a beast!!! Looks sweet....

 

[Spud_G40]

my old Ibiza which now belongs to Rogers was running about 195 bhp, Basically had an APR Remap and a Full Milltec, ran 0-60 in 6.01 and 1/4 in 14.86, that was at inters in 04 or 05, im pretty sure there timing setup was wrong as that 0-60 seems quick compared to some much higher bhp cars

High HP fwd cars are going to suffer 0-60, maybe yours had just enough power (without too much) to get a good 0-60 like that.

I got a 5.98 at inters with est >350bhp but that was with mad wheel spin you see.

 

[gazcuprablk]

throttle control is the name of the game im sure i only had 0-60 in 5.2 secs because my clutch was slipping and i had the map turned down so in the new year when i get it mapped again ill get a boost controller and set the boost in each gear to prevent this wheelspin

 

[cuprabaz]

Model: mk3 Cupra1.8t
Figures: 250fbhp, 218wbhp & 251lbf-ft
0-60: unknown
1/4 mile: 13.656 @ 106.1mph
Mods: Ko3s with all the trimmings, stripped out, R888's
Spent: Lots

 

[tstrahonja]

mk3 cupra
around 200 hp, decat, golf V FMIC
0-60 in about 6 secs
quarter mile 14.5 secs