Cleaned my EGR and intake manifold today. For anyone thinking about doing it, it's a simple job with just a handful of bolts. Though as said almost every bolt is blind and is a to get to. My hands look like i should be on suicide watch now!!! Used a big bottle of parrafin to clean it all which worked a treat and only cost about £6 or so from B&Q.
After i put it back on I used Vag Com to adjust the EGR to its lowest setting and then stuck a bolt in the vacuum pipe. So far no engine light on the dash and hope it stays that way.
Had about 1mm coating of gunk in EGR and manifold btw.
After i put it back on I used Vag Com to adjust the EGR to its lowest setting and then stuck a bolt in the vacuum pipe. So far no engine light on the dash and hope it stays that way.
Had about 1mm coating of gunk in EGR and manifold btw.