Anyone know the part number for a space saver wheel kit?

[james.milroy]

Hi all,

Just traded my MK3.5 FR for a 2023 Cupra Leon V1 e-tsi. I had a wee incident yesterday morning with debris on the road. I needed to jack up the car to get the debris out from under the vehicle. This was when I remembered I don't have a jack, only the compressor and bottle of gunge. Had to make some calls and got bailed out by a workmate. So the long and short of it is I'd like to get a spacesaver wheel, the foam insert and a jack, wheel brace etc, just in case like. I had one my old car and never used it but the tyre was 5 years old so I left it in when I traded it. I've seen this on Caffyns car parts and I've mailed them to check that the insert and tools are included. If someone here has a proper Seat spacesaver and insert, the part number would be greatly appreciated.

 

[serdar_18fr]

Hi all,

Just traded my MK3.5 ST for a 2023 Cupra Leon V1 e-tsi. I had a wee incident yesterday morning with debris on the road. I needed to jack up the car to get the debris out from under the vehicle. This was when I remembered I don't have a jack, only the compressor and bottle of gunge. Had to make some calls and got bailed out by a workmate. So the long and short of it is I'd like to get a spacesaver wheel, the foam insert and a jack, wheel brace etc, just in case like. I had one my old car and never used it but the tyre was 5 years old so I left it in when I traded it. I've seen this on Caffyns car parts and I've mailed them to check that the insert and tools are included. If someone here has a proper Seat spacesaver and insert, the part number would be greatly appreciated.

Hi,

Is the new one an ST too, or a hatchback this time ?
Asking because the original kit differs depending on the body style.

 

[james.milroy]

Hi,

Is the new one an ST too, or a hatchback this time ?
Asking because the original kit differs depending on the body style.

Hi,

Old car was an FR hatch, don't know how I managed to type ST!! New Cupra is also a hatch. I got a part number off of Caffyn's site. It's 5F0071716 which I believe is for the foam insert and toolkit. Just really hoping the aperture in the boot of the MK4 is the same as the MK3 and MK3.5. I'll have a look in mine tomorrow and see if the mounting holes for the foam insert match.

 

[serdar_18fr]

Hi,

Old car was an FR hatch, don't know how I managed to type ST!! New Cupra is also a hatch. I got a part number off of Caffyn's site. It's 5F0071716 which I believe is for the foam insert and toolkit. Just really hoping the aperture in the boot of the MK4 is the same as the MK3 and MK3.5. I'll have a look in mine tomorrow and see if the mounting holes for the foam insert match.

Hi again,

Below is the illustration of Mk4 Leon hatchback's spacesaver insert & the parts in it.
Part number is totally different (5F0012109) but it looks exactly like 5F0071716.
I also could provide the numbers of other parts in the illustration if you need.

 

[serdar_18fr]

Hi,

Old car was an FR hatch, don't know how I managed to type ST!! New Cupra is also a hatch. I got a part number off of Caffyn's site. It's 5F0071716 which I believe is for the foam insert and toolkit. Just really hoping the aperture in the boot of the MK4 is the same as the MK3 and MK3.5. I'll have a look in mine tomorrow and see if the mounting holes for the foam insert match.

I also checked the Mk3 Leon's toolkit and I see that the part number of the insert itself is the same as Mk4's insert.
I guess the part number you have is for the complete toolkit.