Anyone with interference since fitting HIDS?

[LEE69]

Yeah you could do, if no bolt on the drivers side

 

[Seal_LCR]

Just bolt it to the inner wing or slam panel

 

[frazpot]

Hi

I've got this problem too. Bought this wiring loom- That the correct thing?

http://www.ebay.co.uk/itm/261048165322?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

I'm unsure also about the two pin male connector- What does that plug into? Got all the other bits plugged into (i think the correct places) and nothing...? So where does the two pin must be the problem?

Also can you use the negative terminal on the battery as an earth?

Cheers

 

[LEE69]

2 pin goes to the ballast
yes negative on the battery is ok.

 

[frazpot]

ok, so there should be two of those two pin plugs then? (i've only got one) Guess that was the bit about splitting it!! But Main problem now is i cant see anywhere on the ballast to plug that connector into? There are just sealed connectors?

 

[LEE69]

The ballast as 2 connectors one is for the bulbs and the other is this one you need to remove as this loom power the ballasts directly from the battery.

 

[LEE69]

On this set it would connect to the red socket http://www.ebay.co.uk/itm/Xenon-HID...arts_Vehicles_CarParts_SM&hash=item53fea4b659

 

[LEE69]

and on this one the one where there is no connector http://www.ebay.co.uk/itm/A-Pair-55...arts_Vehicles_CarParts_SM&hash=item35cc4a8f6c

 

[frazpot]

Yeh i think i have somewhere to plug the power, Its the bit on the loom I got from ebay that is for 'stock oem headlight socket' on the schematic (see link to loom on ebay abaove) i need to plug in.

Power goes to here?

Then the two pin plug i'm on about i guess needs to go into the headlight- here?

Its this that i only have one of. surely i need one for each headlamp?

 

[frazpot]

Balls!! Photo links-

http://s1303.photobucket.com/user/frazpot1/media/2013-10-09154415_zps74ea0454.jpg.html

http://s1303.photobucket.com/user/frazpot1/media/2013-10-09154052_zpsa53499d7.jpg.html

 

[LEE69]

Yeah just take the feed of one light as it uses that signal to power the new loom you have bought, and that feeds the drivers side lamp.

 

[frazpot]

Great, figured that bit out then.

Got everything in the right place- wired up- Both lights on.

Still the same interference on the radio!!!!!!!!!!

 

[nathan_20vt]

Fitted my HIDs last week but have noticed them flickering slightly and have interference with the radio on. Bought this... http://www.ebay.co.uk/itm/360622216757?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 hope it's the right one.... Just trying to get my head around it before fitting where does the black female plug go?

 

[LEE69]

Black female plug is the feed from the headlight loom, remove then and have female connectors added to make it fit (iirc)

 

[nathan_20vt]

Arr I see just needs a little modification then. I hope this will sort my problem. Worth a go for under £7. Cheers lee