breather filter

[s20ty c]

i am trying to find a filter that will fit on the breather pipe for the secondary air pump, has anyone got a link to a website i can buy it straight of! and how would it fit without cutting it to the filter as it has it has a connection for the air box and i dont want to remove the secondary air pump?

 

[Reuvers]

The connection used to plug it into the airbox will need to come off. But if you fit a open cone then you'll be removing the entire airbox anyway...
then just measure the plastic pipe diameter wise, and stick a breather filter one there in the same size...
Like this (see front of bay)

 

[Riko]

Better off removing it get a louder dv then!!

 

[s20ty c]

Better off removing it get a louder dv then!!

remover what, the secondary air pump?

 

[Riko]

Yup, removed the N249 bypass. Clears a nice little space in the bay!

 

[Reuvers]

you can do the n249 bypass and removal with resistors and keep your pump. thats what I did

 

[s20ty c]

you can do the n249 bypass and removal with resistors and keep your pump. thats what I did

and what do i gain from this?

 

[Riko]

I did mine because the resistors from the n249 broke off, so thought jus get rid!

 

[s20ty c]

i dont what to do this just yet, thanks tho, i want to no how people have conected the breather fillter with out cuting the pipe so i can put it back to standard easy!

 

[Riko]

matt@sws just attached a small breather filter to the plastic piece in a recent threat. Infact if you looks at Rev's picture above you can see he has a red filter on the end of his. Just need the correct size filter.