Carbon Fiber wrapping

[cupra!]

I have just bought some carbon fibre vinyl to wrap either my bonnet or roof, along with the wing mirrors, door handles and door Pillars. would like some advise as to which parts i should do first if at all?? i have already done some interior with this stuff and its awsome!

Comments all welcome cheers.

 

[Dave_R]

You can get carbon fibre look pillars from Seat! There's a thread on here and my car as always had them.

I would just get the pillar decals from Seat, do the mirrors (seen these done before) they looked good and then maybe the roof but leave it at that...... also from Seat you can get a carbon fibre decal to go behind the rear number plate!

Leave it at that then.... would only go mad if the bits are real carbon fibre!

 

[Musty Pie]

Didn't realise there was another orange cupra in herts

I will keep my eye out for you. Where abouts you based in herts

 

[cupra!]

Yeah I don't want it to look chavi just a nice door and b pillars I think that will do it. I'll post some pics up when it's all done

 

[Dave_R]

You can get them all from Seat then.... check out my project thread and you see them also there was a thread with all the parts numbers for them.

 

[cupra!]

Here are a few of the Interior parts which i have just finish Wrapping, sorry about the quality i took them on my Iphone.

Here is a before shot taken a long time ago.

and here is the after.....

Comments welcome as im not sure if i like it??

Thanks

 

[Dave_R]

I quite like that.... good job!

 

[ather`s]

does look nice!

 

[Pander]

that looks quality mate. fancy doing mine ?

 

[cupra!]

I would be happy to do other peoples I'm doing some for people on a golf forum too. But cost would depend on what you want doing as the carbon vinyl is exspencive.

 

[ather`s]

make sure you do then?? as for the carbon wrap, how flexible is it? you reckon the mirror surrounds could be done?

 

[crezz]

looks like a great job, is it easy to work with?

 

[cupra!]

It's not to hard just need a heat gun to make the vinyl pliable to bend round the corners. I have just finished my roof which took 2 of us 4 and a half hours. Not as easy as I thought but loving the result. Pics comming soon!

 

[cupra!]

Here are a few pics not very good as taken from my iphone. I know i could do a better job if i was to do this again but for a first time effort i think it came out ok. Its ok working with small parts like i have previously done but working on suck a large scale the Vinyl is hard to keep flat and stop it crom creasing.

Well this is the final result. Im happy with it but just needs a bit of back to black rubbing on it to get rid of some scuffs and get it looking clean etc.

 

[CraigW]

I really like the roof. It looks great.

Love the look of the interior bits that you have aswell. Where did you get the vinyl from?

 

[D--R--E--W]

looks brilliant mate

 

[cupra!]

I really like the roof. It looks great.

Love the look of the interior bits that you have aswell. Where did you get the vinyl from?

I got it from a place called William smith, its a industrial sign making place, or you can buy it from ebay, search for 3M carbon fiber.

 

[crossedmike]

I have just bought some carbon fibre vinyl to wrap either my bonnet or roof, along with the wing mirrors, door handles and door Pillars. would like some advise as to which parts i should do first if at all?? i have already done some interior with this stuff and its awsome!

Comments all welcome cheers.

how much was the wrap and how much did you get if you dont mind me asking because i wanted to do the centre console and speedo clocks and maybe the bonnet but depending on price im in 2 minds as a previos comment mine has the carbon fibre on alread on door pillars and numberplate surround and in the back boot lifter

 

[cupra!]

It was £80 for 2 mtrs by 1220mm

 

[cupra!]

I have just finished also carbon wrapping the blanking panels for the wing mirror covers on the inside. Just thought i would add this, im going to be doing a few more bits so will just update as i go along. hope you all like?