cordoba hub

[craig87]

If anyone knows a machinist in surrey that would drill out one of my threads and rethread the hub would be reatly appreciated. If not i will have to replace both front hubs and bearings costing me £85 each side. Its the two front hubs i need one thread on each side drilled out then rethreading. Thanks

 

[acidstrato]

can i ask why?

 

[craig87]

because the person who owned the car before me put a bolt in each front side that was not the correct thread and it has mucked the internal thread up. By getting these rethreaded it would save me a lot of money!!!

 

[goble]

just change to studs instead..

 

[craig87]

there is no thread left whatsoever on the inside and they are joint to the hub! There is no way to push these out or get a bigger bolt etc there are only two options, new hubs and bearing or get them rethreaded!!