Cupra R "mud flaps"

[chisel]

Hi,

I am looking for part number of this mud flaps ... any idea how they are mounted ?



thanks,
Peter

 

[hubbly_bubbly]

Thats not a mud flap, that is a diffuser. I have the part number at work. Will have to look for it and will get back to you asap

 

[alx_chung]

Thats not a mud flap, that is a diffuser. I have the part number at work. Will have to look for it and will get back to you asap

The bit that the arrow is pointing to is no a diffuser its definitely a splash guard or flap.
Alex

 

[owen lcr]

has anyone got the P/N for the defuser then hahahaah

 

[Syphon]

I think it's part of the wheel arch lining. I didn't take a close look when we were with the car as I think I only noticed it when we got back and I saw it in the photos. I don't know if either of the Marks had a closer look.

Scott

 

[rllmuk]

If you look at the other pics you guys took, there don't appear to be mud flaps fitted. However, surely the standard flaps will fit on the rear anyway as the did fine on my FR (unless the facelift rear bumper FR/Cupra/Cupra R screws are in a different place)?

Of course with skirts the fronts don't fit.

 

[chisel]

Hi.


I mean the plastyk element pointed with arrow next to the bumper, but it is not a part of bumper. I saw yesterday R live and this is a peace coming out from plastic wheel arch! I drive
LC MY10 and I don't have this small "mud flap".
Do you think it is connected with plastyk wheel arch ?

 

[Syphon]

If you look at the other pics you guys took, there don't appear to be mud flaps fitted. However, surely the standard flaps will fit on the rear anyway as the did fine on my FR (unless the facelift rear bumper FR/Cupra/Cupra R screws are in a different place)?

Of course with skirts the fronts don't fit.

No there weren't mud flaps fitted. I think this is a lip that comes out of the wheel arch.

I would imagine the mud flaps would still fit. Best to check with the dealer when all the parts are on the system (which they probably are by now)

Scott

 

[hubbly_bubbly]

Sorry guys must have been sleeping when I looked at the picture. Owen I have the diffuser p/n will get it up.

 

[hubbly_bubbly]

has anyone got the P/N for the defuser then hahahaah

Double Central Exhaust Outlet – 1P0071061A

Single Exhaust Outlet LHS – 1P0071061

 

[J0n3]

I have Cupra R (2010) European spec and it has those little "mudflaps". I'm not sure what they do It may prevent some of the dirt from wheels getting onto the boot area, just a guess...

 

[Poverty]

fiats have those "mud flaps" I think they look stupid

 

[chisel]

Anyone can check part number of this "mud flaps" ?

 

[AndrewJB]

Ive been talking to Dave @ SERE About them hes ordering me some should arrive in next few days


To see if they can be retro fitted to Pre-Facelift


Me and Dude had a look at them on his its not obvious how they are attached

 

[fireblade929]

These are also fitted to the passat cc.......

 

[GREG_R84]

Iv been looking at these for a while now as iv seen them on a few mk2 R's and also thinking of retro fitting. From what i saw at a dealers they seem to be attached behind the wheel arch lining

 

[AndrewJB]

Yeh i was expecting them to be screwed into the arch liner or something but they didnt seem to be, ETKA doesnt show how they attach either. all will be revealed when i get mine in next few days

 

[GREG_R84]

Yeh i was expecting them to be screwed into the arch liner or something but they didnt seem to be, ETKA doesnt show how they attach either. all will be revealed when i get mine in next few days

How much did they cost you, if you dont mind me asking?

 

[AndrewJB]

There not UK Stock so theve been ordered from SEAT Spain

£4 each was the listed price for them

When they arrive will see how they attach and if its possible to retro fit i will post pics

 

[GREG_R84]

Cheers Andrew, i'll look out for the pics