DIY Boost leak tester guide

Charlie20v

Active Member
Aug 15, 2012
30
0
Derby
Hi, wondered if anyone could help me? would it be ok to plumb the airline straight into the inlet manifold via the brake booster vac pipe and block of the tip (pcv and maf)
 

Sprogpole

Active Member
Jul 20, 2012
360
1
Leicester
Ezibleed brake bleeding kits have most of the stuff needed to make a boost leak tester, and it runs of the spare tyre so no compressor noise.

Works a treat for me :D
 

Greavesy

Active Member
Jun 30, 2013
380
0
Donny
Anyone on Donny made one of these what would be willing to lend me for a day or two? Will provide beer tokens.

If not I'll make on myself.
 

chiR26

Guest
Anyone on Donny made one of these what would be willing to lend me for a day or two? Will provide beer tokens.

If not I'll make on myself.

If you make one can you help me check for leaks ;)
I'm often in my inlaws who live in DN5 although I'm from Cheshire.
Absolutely brilliant guide btw, my problem is I bought the car as is and I'm totally clueless.

Sent from my GT-I9300 using Tapatalk
 

Greavesy

Active Member
Jun 30, 2013
380
0
Donny
Think I'm going to order the kit tonight to make one. Once I've got it built and tested I'll let you know ChiR26.
 

chiR26

Guest
I've already got one, need to set up a Donny boost leak testing meet :p

Sounds like a plan... if I don't sell the 172 20vt first. I'd probably come anyway, I do love any excuse for a meet.

Sent from my GT-I9300 using Tapatalk
 

Greavesy

Active Member
Jun 30, 2013
380
0
Donny
Sounds like a plan... if I don't sell the 172 20vt first. I'd probably come anyway, I do love any excuse for a meet.

Sent from my GT-I9300 using Tapatalk

What you after mate?
My mates got a Megane 225 in back and I think he'd literally fall in love with a 172 20vt.
 

chiR26

Guest
Not after anything tbh.. It's quite a well known car. It was AndyRGs old car so you can be sure it was built to a high standard.. Ive not even listed it for sale and already there is 2 people selling their cars to try and buy it.. Someone came from South Wales to view/test drive yesterday and they're getting quotes fit insurance. . Can't see it being around long tbh. .

Sent from my GT-I9300 using Tapatalk
 

chiR26

Guest
Guy made me an offer id usually accept but on this occasion it gave me the opportunity to keep my little turbo :))
Also picked up my first cupra today but can't post pics yet :(

Sent from my GT-I9300 using Tapatalk
 
Last edited by a moderator:

cuprapete

Active Member
Feb 18, 2010
193
0
Damp Devon
Finally got round to making my boost leak tester today.

made it out of a sink waste trap in the end as it fitted perfectly together.

hwz79j.jpg


Have also found a big leak in the PCV system so am going to have to look into how to remove the whole lot I think as it looks a right pain to repair/replace
 
Last edited:

chiR26

Guest
Quick Q, surely you can use the gauge on the pump? More a statement lol
 

ssbnumber34

Active Member
Nov 26, 2013
94
0
Just tried this on my 180 through the pipe that goes to my throttle body, had to block up the intake sipe end too but for some reason the air goes down nearly as fast as its put in? what am i doing wrong here?
 

tully78

Active Member
Jan 8, 2014
56
0
I just bought a bicycle inner tube for mine and cut the part off with the valve attached worked a treat...lol
 
SEATCUPRA.NET Forum merchandise