-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
DP / Decat rubbing on bulkhead
- Thread starter peter_cupra197
- Start date
cuprachrissy
Guest
it's well worth noting that different people have different expectations & acceptance levels for "good fit"
that's not a jibe at anyone, but just because someone writes it on an interweb, doesn't mean it's true
that's not a jibe at anyone, but just because someone writes it on an interweb, doesn't mean it's true
http://www.seatcupra.net/forums/showthread.php?t=166937&highlight=ths+de-cat
Have a read through this lot it should help a bit.
Have a read through this lot it should help a bit.
Without knowing what one hes actually bought i couldnt say but most are the THS one's.
The exact one i bought an had no problems with is this one, although pics have changed since i bought mine. Was from the same user as the link below
http://cgi.ebay.co.uk/VW-GOLF-4-1-8...sidZp1713.m153.l1262?_trksid=p1713.m153.l1262
Mine was never mod'd by cutting an welding and didnt rub at all on the bulkhead.
I did have to cut and weld mine, but I do agree with myki that this is quite a common thread...
I for one for mentioned quite a few times that you're fitting a DP off a golf to your ibiza (cordoba). So its logic that it might not be an exact fit. If you have no access to welding I'd probably say don't do it, as chances are it will need some for of modification.
I for one for mentioned quite a few times that you're fitting a DP off a golf to your ibiza (cordoba). So its logic that it might not be an exact fit. If you have no access to welding I'd probably say don't do it, as chances are it will need some for of modification.
yes myki that is the exact one i bought im going to get it modified as it bangs so badly under the centre section it is rubbing on the bulk head but is worse underneath would welding the extra section in get rid of this or am i better cutting out the 3 flange part and welding an extra piece in there also? thanks
im going to get it modified as it bangs so badly under the centre section it is rubbing on the bulk head but is worse underneath would welding the extra section in get rid of this or am i better cutting out the 3 flange part and welding an extra piece in there also? thanks
yes myki that is the exact one i bought
If the downpipe itself is cut, bent downwards then welded back up it will pull the bottom section down which in turn will bring it away from the body. Mine knocked on the centre a tiny bit but only on idle so wasnt a problem, but mine never touched the bulkhead in the slightest.
The bit that rubs on the centre is where the bottom section is flaring down to the 2.5". Ive ringed the section that rubs so you can see what im on about. Bare in mind the pic is from after i had my sports cat put onto it
And another pic just cos i can lol
As you can see, its exactly the same pipe everyone else has problems with so nobody can say im bullshittin now
dai cupra
Guest
yes that is the same myki i think you are right where it is knocking (sounds like centre) will get it on a ramp saturday and see.
myki was that any regular 2.5" sports cat you fitted between? as I've been thinking about this as they aren't expensive at all and save me the hassle of switching back the oem one when MOT lurks around the corner.
Similar threads
