Nov 12, 2025
1
0
So I’ve had the car a couple months now and one day drove same amount of miles I usually do the Eml came on got it scanned and said it was the coolant thermostat so I replaced that and the fault still persists the bank 1 sensor 1 is dead due to pops and bang previous owner had mapped into the car just wondering if there’s anything else I’m missing before replacing the lambda sensor
 

Attachments

  • IMG_3670.jpeg
    IMG_3670.jpeg
    178.9 KB · Views: 47
  • IMG_3671.png
    IMG_3671.png
    115.6 KB · Views: 43
With the fault code you have and the fact that a part didn't fix the fault, I'd be checking the wiring next.
 
  • Like
Reactions: Syphon
Did you do the thermostat as well as the sensor? Does your engine have two temp sensors or just the one?

Definitely get the ECU sorted out, Pops N Bangz maps are for Paedophiles anyway.
 
Did you do the thermostat as well as the sensor? Does your engine have two temp sensors or just the one?

Definitely get the ECU sorted out, Pops N Bangz maps are for Paedophiles anyway.
Why would a paedophile have a pop and bang limiter? Surely it'd alert and frighten their potential victims? 🤣