-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
its not massive i agree but i think the pic makes it look smaller specialy as i have taken the souroundings out! it works a treat tho!
Morning,
1. What are these pipes called (see photo)? seen lots of people with replacement kinda polished flexi pipes and wanted to order some for mine.
2. Are they easy to swap over aswell or do they hold fluid/fuel etc?
3. And where can i buy them from?
TA!
Rich
1. What are these pipes called (see photo)? seen lots of people with replacement kinda polished flexi pipes and wanted to order some for mine.
2. Are they easy to swap over aswell or do they hold fluid/fuel etc?
3. And where can i buy them from?
TA!
Rich
they are your fuel lines.
this is what I did to them
do an advanced search for threads started by Myki da Pyki. You'll find a thread called fuel lines.
It tells you exactly what you need. iirc it was something like 8mm inside diameter braided fuel injection line. Then buy 4 hosefinishers to make it look pretty.
Costs about 20 quid for 1 meter of braided line (and you have left over) and 4 hose finishers.
Got my hose finishers off Hellperformance on ebay. Cheap and quick delivery
this is what I did to them
do an advanced search for threads started by Myki da Pyki. You'll find a thread called fuel lines.
It tells you exactly what you need. iirc it was something like 8mm inside diameter braided fuel injection line. Then buy 4 hosefinishers to make it look pretty.
Costs about 20 quid for 1 meter of braided line (and you have left over) and 4 hose finishers.
Got my hose finishers off Hellperformance on ebay. Cheap and quick delivery
changed one of my fuel lines for 'Competition Stainless Steel Braided INJECTION Fuel Hose' yesterday still got 1 to go took me foreva to do. i found the clips a pain in the arse to get off then struggled to get the pipe its self off. looks good but my hands are cut to shreds!! oh well better go do the other 1! got my fuel lines from ebay aswell make sure there high pressure and that u get enough cos thay come in 1m lenths and u dont wana be short!
Last edited:
u might get a tiny bit come out but nothing to worry about! nothing came out of mine when i did them! think i paid £10 for a meter
Yeah no need to worry about anthing coming out. Disconnect it at your fuel rail first and bend the pipe upwards whilst you connect the new braided hose to the fuel rail. then repeat at back of the bay.
I didn't really find it hard to do at all. I guess you get used to the one time clips after removing many of them haha
I didn't really find it hard to do at all. I guess you get used to the one time clips after removing many of them haha
There is 2 N12's. They are both on or near the black plastic box which is your N249.
Below is a pic of my burnt n112 when it broke off and fell on manni
On the first picture you can see the second N112 hanging over the back of the rockercover
hope that helps
Danny I like your bay, but why is your chargepipe pointing upwards so much?
And maybe its time to clean your filter...
Similar threads
