Ibiza 130 tdi

Black Magic
Jan 15, 2007
6,275
1
Somerset
Does anyone know where to get the new facelift styleee front bumpers? Apart from Seat. I have seen them on ebay for £65 but am always weary of ebay as have had trouble with them in the past. I want a fully fitted bumper, like with all the mouldings and honeycomb grills...and the fog lamps if mine off me Sport wont fit. does anyone have any idea where or how much??
 
face lift bumpers should be the same moulding as the pre face lift I think, cupra ones are the only diffrent ones
 
do you know of anywhere where you can get the brand new style Cupra front bumpers? I dont like the front bumper on mine, I am seeing a lot of the new facelift (06>) Ibizas driving around and they look so much more sporty and agressive. thanks for the advice btw, that would be good if my mouldings would fit. i know on the mk3 Ibizas you have to take the mouldings off to get to some bumper torx bolts....
 
cupra bumpers you can buy straight off seat. seat.co.uk and ibiza parts. but if you bought the cupra bumpers you would need new mouldings. They arnt much less than £50 anyway
 
the facelift bumpers are different, even the most basic models have cupra-esque bumpers but one solid colour, instead of diffuser inserts on the rear and bigger centre grille area on the front that are on the FR, the cupra has the same back but solid side grilles as they have a front mount intercooler
 
Last edited:
seeing them side by side the facelift differences are a lot more obvious

seat_ibiza_award_09_04_05.jpg


ibiza_new_5d.jpg
 
Id like to upgrade my bumpers too, but Im thinking of a FMIC in the near future, so would the updated FR bumper be alright 4 this, or would I need the cupra bumpers to house it??
 
cupra bumpers you can buy straight off seat. seat.co.uk and ibiza parts. but if you bought the cupra bumpers you would need new mouldings. They arnt much less than £50 anyway


where did you see these on Seat's website? I've looked but to no avail! :cry:
 
Id like to upgrade my bumpers too, but Im thinking of a FMIC in the near future, so would the updated FR bumper be alright 4 this, or would I need the cupra bumpers to house it??

You should be alright with the standard bumper or FR bumper and a FMIC. The problems occur when you fit the Cupra bumper to a model with a SMIC as the Cupra bumper doesn't have the vent fitted to feed the SMIC. :)