Fitting k03s pics

[godzuki]

Hi peeps!
Need to fit my k03s in the next few days (when i have some time spare) and the only thing i need to sort out is the 2 vac hoses into1
i did a search but i can't find any pics of which hose you blank and how to sort the spare pipe from the actuator
do i just blank it off with a screw or what?
I don't want to get it wrong and some pics of it would be great (if i can see exactly what you do with them there will be no problem)
Also what size vac hoses do you need? i have some 4mm,will this be ok?
i intend to photo it all before & after so i could post them up if it'll help others or if you want the sending via email just pm me

 

[__B3NNY__]

I think its about 6mm vac hose mate, but im not 100%. use a stright joiner and join them into one, or just replace with one silicone hose, or you can just 'plug' it up. Im pretty sure theres a guide on the main site?

 

[JIMYU]

4mm will be fine. as above, just replace whats there with new silcone hose, or blank the spare one off with a screw or something.

 

[Beaker™]

I used a little brass plug i made, anything that fits nicely will do.

 

[godzuki]

Thanks very much for the reply's guy's!
If its just a case of plugging like that then its all sorted, pics really do say 1000 words,like i say i'll photo the whole swap and see if i can post it up to show people exactly whats involved

 

[Beaker™]

Yeah mines been like that for ages, no problems at all with leaks or actuator movement.

 

[Prebs]

godzuki: Would be nice with some pics during the swap as Im about to do the same ko3s convension soon and need some good tips along the way!

Prebs