flip key info thread

[Chemical Al]

what car you got?

what key you got (part no.)?

frequncy can be 434 or 433 makes no odds (this was discussed earlier in this thread) it is part no. that is important.

 

[SportCider]

what car you got?

what key you got (part no.)?

frequncy can be 434 or 433 makes no odds (this was discussed earlier in this thread) it is part no. that is important.

Its an Ibiza FR TDI

Key Part no. 7M3 959 753

Thanks for your reply.

 

[Chemical Al]

IIRC thats the siemens key, which it the right one, if you had a MK2 ibiza!

 

[thePHILosipher]

i used 1J0 959 753 AH on my mk4 fr, boot button worked fine.

Will This be ok for an 56 plate Ibiza FR Tdi?? also wheres the best place to get it programmed??

 

[Chemical Al]

should be, you should be able to do the remote part yourself, then just swap the transponder from your spare key into the new one, and get the blade cut

 

[Guinness]

is there anywya to program this without having a door lock barrel?

 

[Chemical Al]

yes, vag com

 

[Guinness]

aye, all sorted now anyway like. Took some effort though

 

[cupra.al]

went to get my flip key coded at the dealers today for my mk4 ibiza i waited an hour to find out it wouldnt work because the mhz. they done the work for free though as there was no sucsess.

 

[Chemical Al]

went to get my flip key coded at the dealers today for my mk4 ibiza i waited an hour to find out it wouldnt work because the mhz. they done the work for free though as there was no sucsess.

you mean you bought the wrong key, mhz doesnt come into is unless its different from 343/344 ie 315

what car and what key do you have? part no.?

 

[cupra.al]

i have a mk4 ibiza the part number is hlo 1ko 959 753 and its 434mhz.
the dealer said the mhz wasnt right and that he was unsure if it would work as the ibiza doesnt come with a flip key.
but as you said i think i got the wrong key although it has a seat badge on it not that that is anything to go by.

also my original remote key has a plastic looking thing attached in the same section as the blade half. but the flip key doesnt have one should it?

 

[AndrewJB]

Woohoo ive been wanting a key for ages and i aquired a HLO 1KO 959 753 G Of Ebay the other day for £19

i was very very worried coz i didnt think it would work but i set about anyway by firstly changing the transponder out of my 2nd (non remote key)
I then put the key back together went to the car ,Turned the ignition on with the 2nd key (non remote),Opend passanger side window (just incase) and then locked me car with the 1st key (remote key but used the key to physically lock the door) and then held down the unlock key on me flipkey for 6 seconds and then pressed lock 3 times . Im not sure if i needed to press lock 3 times as my car hasnt got a alarm so it wouldnt bleep

opened door physically with 1st key took 2nd key out of ignition and woohooo it works! i just need to get the blade cut now

 

[Seref]

Is it possible to change my key to a flip key if I don't have my spare?

From what i've been reading I need my spare which I never got.

Edit: Oh and how do I know which key part number to look for? I know my key is 424Mhz it says so on the side of it.

Edit 2: Turns out I did have the spare afterall, i've just managed to find the same key the guy above me has on ebay and i've won it so now i'm waiting for it to arrive.

 

[AndrewJB]

Does anybody know if its possible to Program the Boot button on a 3 button remote to do anything?

I dont know what like but just to do something lol

 

[AwesomeAl]

Your key will not work with the boot as it is a 1K0 Key.
The 1K0 key uses a Can-bus digital signal to open the boot, where the 1J0 part number gives an analogue signal to tell the boot to open.

I mentioned this on the previous page as I'd done the same thing in buying a 1K0 part number key.
Since then I've replaced the remote part of the key since with a 1J0 959 753DA and it works perfectly including the boot button
1J0 959 753 AH will also work the boot for you.

 

[Seref]

Woohoo ive been wanting a key for ages and i aquired a HLO 1KO 959 753 G Of Ebay the other day for £19

i was very very worried coz i didnt think it would work but i set about anyway by firstly changing the transponder out of my 2nd (non remote key)
I then put the key back together went to the car ,Turned the ignition on with the 2nd key (non remote),Opend passanger side window (just incase) and then locked me car with the 1st key (remote key but used the key to physically lock the door) and then held down the unlock key on me flipkey for 6 seconds and then pressed lock 3 times . Im not sure if i needed to press lock 3 times as my car hasnt got a alarm so it wouldnt bleep

opened door physically with 1st key took 2nd key out of ignition and woohooo it works! i just need to get the blade cut now

Mine arrived today and I did what you suggested and it does work so I just need to get it cut now, shame about the boot button i'll look into getting a 1J0 remote...

 

[pierrehage]

Hi guys i have an Ibiza FR 2007 ... and want to have a flip key to my car... but i dont know which flip should i buy 2 button or 3 button??... can some1 helps me .... and does it work perfectly ?
thanks in advance

 

[pierrehage]

flip

any reply or help?

thx in advance

 

[RichieRich]

hi pierrehage, i had the 3 button one for my 07 plate ibiza fr and all 3 buttons worked, i even still have it on my window ledge lol

 

[cupra.al]

hi pierrehage, i had the 3 button one for my 07 plate ibiza fr and all 3 buttons worked, i even still have it on my window ledge lol

do you want to sell it?