Manual covers the ABF. Most areas are the same for all models, engine components and sensors have there own location notes in brackets like (sensor for ABF engine located to the rigt of inlet manifold). The pictures are mainly from the 1.4 but certainly helps
its the brakes im after more han anything? it cover the 2.0 16v cupra sport 1999 abs rear brakes?
What do you need to know, got my manual in front of me now. Wouldnt hold your breath for any technical answer tho
oh right nice one mate, if you could have a look in there regarding the rear brake discs. I bought some rear discs went to fit them today and the existing ones had a bearing and abs rings on the back. I cant seem to remove them off the existing ones onto the new ones and thought that the haynes manual would be the best to find out how. help appreciated thanks alot.
Nothing in haynes that can help you there mate, the only note in removal and refitting rear disc is
15. slacken and remove the rear hub nut, then slide off the toothed washer and remove the outer bearing from the centre of the disc.
in abs section it is really helpful and reads:
Rear reluctor rings
21. The rear reluctor rings are pressed onto the inside of the rear drum/disc. If removal is necessary, remove the drum/disc and take it to a seat dealer, who will have access to the necessary tools required to extract the old ringand press on the new one.
Good ol' haynes
15. slacken and remove the rear hub nut, then slide off the toothed washer and remove the outer bearing from the centre of the disc.
in abs section it is really helpful and reads:
Rear reluctor rings
21. The rear reluctor rings are pressed onto the inside of the rear drum/disc. If removal is necessary, remove the drum/disc and take it to a seat dealer, who will have access to the necessary tools required to extract the old ringand press on the new one.
Good ol' haynes
ok mate thanks alot for looking atleast i know now. do you think i have been sold the wrong discs? should my new discs have come with the abs rings?
without on all the ones i have seen
lever off your old ones (gently) and clip em to the new ones
lever off your old ones (gently) and clip em to the new ones
Similar threads
