• Evo Magazine are looking for a mint and (and ideally unmodified) Leon Cupra Sub8 to drive and photograph for a feature. Find out more here .
  • Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

Brody_Antoine

Active Member
Jul 20, 2014
48
0
plus.google.com
Hi Guys I'm experiencing some issues with a project seat Leon tdi 2001. Having done a diagnostic check because I suspected that the car was showing signs of front puddle light issues. Thought it could be the micro switch. Sometimes the alarm goes off even when the switch in the ignition. I scanned the central electric got fault codes : interior monitoring sensors 36-00 open circuit. Locking module for central locking; front passenger side (F221) 27-00 implausible signal. Can anyone help me? I'm in Aston Birmingham

Sent from my GT-I9505 using Tapatalk
 
I've taken out the door module on the passenger front as it came up with a fault code during diagnostic check. I discovered the connector prongs broken. I repaired same and as soon as I reinstall and the front puddle lights came on and went off.

Any suggestions is welcome

Sent from my GT-I9505 using Tapatalk
 
Just to let everyone knows that I've taken off the door module and found that the connection on the circuit board for the wire harness some prongs are totally destroyed. If recreate connections and it worked for once but failed. I'm gonna change the complete module and give a feedback at a later stage.

Sent from my GT-I9505 using Tapatalk
 
I know it's late to respond on my progress but I've install new door module on both front doors and I've got my puddle light back and my audible warning light. Anyone need help with that issue feel free to contact.

Sent from my GT-I9505 using Tapatalk
 
0e4cd886eb0376f38e9d8d2954ad7d0f.jpg
67c3198969864ced8e326ab774e7415b.jpg
bf1f3af751d70bc9268baf481c287ba8.jpg


Sent from my GT-I9505 using Tapatalk
ca85742a66b1354b3c298dd57f2be414.jpg
 
Last edited:
Hi tapatalkers I need some ideas now that I've done my bumper and hood. The car came with 15" 5x100 alloys. If I am to go to 18" 5x100 do I need to change the shock absorbers and spring to give the car lift?
I attempted a 18" and I had to sold it. Any help and comments would be appreciated. Thanks.

Sent from my GT-I9505 using Tapatalk
 
What's everyone doing now. I've install some logo lights car looking OK now let me know what you think.

Sent from my GT-I9505 using Tapatalk
49f4e131bf0290b3f0bfddd1fd0b242e.jpg
ac0ecc9e5d809ce06122d3c6ec8eb083.jpg


Will upload some better pic.
 
Last edited:
Looking nice. Looking at some puddle lights for myself. Where did you get them from? Easy to fit?

Sent from my HTC One using Tapatalk