Help with a fmic for my LC????

[mikey_b]

Hi folks as all of you's are aware of the forge fmic witch costs about £650ish wanted to know if this dose the same job....http://cgi.ebay.co.uk/Medium-TwinPa...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318

 

[everitt1980]

I have just fitted that one to my ovni yellow 2001 cupra. Some grinding needed but it fits.

 

[paul-murphys]

hi mate doing one of these on my lcr but guy has used one like what you looking at.... here is the link hope it helps

http://www.seatcupra.net/forums/showthread.php?t=204025&page=6

 

[mikey_b]

I have just fitted that one to my ovni yellow 2001 cupra. Some grinding needed but it fits.

wicked mate what pipes and hoses did you need to get it 100%?? and where did you need to grind it??

 

[Croc]

amd are doing the forge one 600 fitte djust had it done to mine

 

[mikey_b]

amd are doing the forge one 600 fitte djust had it done to mine

very nice mate but i aint got 600 as i just put my car back together after i crashed it...

 

[everitt1980]

This is what it looked liked halfway through. The crash bar has to be cut around the cooler as its a lot wider than the forge one, and you need to grind some of the plastic from the inside of the bumper, none of which can be seen when its back on.

 

[everitt1980]

This is everthing i used.
3 of these
http://cgi.ebay.co.uk/63mm-2-1-2-ID...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
2 of these
http://cgi.ebay.co.uk/63mm-2-1-2-ID...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
1 of these
http://cgi.ebay.co.uk/Medium-TwinPa...72205QQcmdZViewItemQQ_trksidZp1742.m153.l1262
1 of these
http://cgi.ebay.co.uk/2-5-TURBO-INT...d=p3286.c0.m14&_trkparms=72:1689|66:2|65:12%7
2 of these
http://cgi.ebay.co.uk/BLACK-76mm-63...2:1683|66:2|65:12|39:1|240:1318C39:1|240:1318
Also some good jubilee clips to replace the crap ones that come with the pipe kit, all the other couplers are to replace the blue ones you can see in the picture in previous posts as they are rubber.