I finally got round too doing some logs on the Leon Cupra R
as i bought the car and the previous owner mentioned it had been remapped, but i wanted to make sure,
So i bought a Revo Sps 1 to switch the map and off, and decided to do some logs to see if could tell the difference on Meas Bloc "115"
I got told on a earlier thread, to measure the Actual pressue in millibars, and you could see if the car had been remapped.
So today i did 2 runs and 2 logs earlier, and just wondered if you guys could have a look,
Although i do think i have got a boost spike problem, could be hoses collapsing,
This is the log with the SPS switched off in the "standard" map...
RPM Load Absolute Pres. Absolute Pres.
TIME TIME
MARKER STAMP /min % mbar mbar STAMP
0 2920 126.3 1760 1490
0.4 3040 156.4 1790 1830
0.8 3160 151.1 1800 1780
1.22 3320 151.1 1800 1760
1.62 3440 154.1 1810 1780
2.02 3560 154.9 1820 1800
2.51 3720 157.9 1820 1800
2.93 3840 155.6 1810 1810
3.42 4000 157.1 1810 1810
3.92 4160 159.4 1810 1810
4.34 4280 157.1 1810 1820
4.74 4400 157.1 1820 1800
5.23 4560 157.1 1810 1800
5.63 4680 150.4 1800 1820
6.03 4800 154.9 1800 1830
6.45 4920 154.9 1800 1810
6.85 5040 151.9 1810 1830
7.25 5160 158.6 1830 1810
7.65 5240 157.1 1850 1820
8.05 5360 159.4 1860 1840
8.45 5440 155.6 1880 1850
8.85 5560 159.4 1890 1860
9.26 5640 161.7 1910 1870
9.76 5760 152.6 1920 1940
10.18 5880 151.9 1900 1910
10.57 5960 157.9 1890 1910
10.96 6040 169.9 1870 1850
11.37 6120 158.6 1850 1860
11.77 6200 151.9 1820 1870
12.19 6280 152.6 1800 1810
12.67 6400 145.9 1780 1810
13.09 6480 146.6 1760 1760
13.49 6520 142.9 1720 1770
14 6600 131.6 1700 1750
14.49 6680 129.3 1680 1690
14.89 6760 122.6 1640 1720
15.29 6760 121.1 1620 1640
15.69 6840 131.6 1610 1610
16.11 6360 26.3 990 1470
Heres with the SPS swtiched on - "performance map" it does seem to boost alot higher..
RPM Load Absolute Pres. Absolute Pres.
TIME TIME
MARKER STAMP /min % mbar mbar STAMP
0 3160 166.2 2260 1990
0.5 3320 191.7 2270 2540
0.9 3480 191.7 2280 2270
1.3 3600 191.7 2290 2440
1.71 3760 191.7 2310 2270
2.21 3960 191.7 2310 2360
2.61 4080 191.7 2310 2300
3.01 4240 191.7 2300 2310
3.41 4360 191 2290 2290
3.82 4480 191.7 2280 2280
4.32 4680 187.2 2250 2220
4.72 4800 186.5 2240 2220
5.12 4960 188.7 2230 2230
5.52 5080 187.2 2220 2200
5.94 5160 190.2 2220 2240
6.34 5280 189.5 2210 2200
6.83 5440 190.2 2200 2200
7.34 5560 187.2 2190 2200
7.74 5640 178.2 2170 2190
8.14 5760 179.7 2150 2140
8.64 5840 175.9 2120 2140
9.04 5960 172.2 2110 2150
9.45 6040 171.4 2110 2110
9.85 6120 167.7 2110 2100
10.25 6200 182 2120 2030
10.65 6280 173.7 2110 2030
11.05 6320 170.7 2120 2060
11.47 6400 167.7 2100 2110
11.87 6480 163.9 2090 2090
12.27 6520 165.4 2080 2040
12.78 6640 148.1 2070 2150
13.18 6680 155.6 2080 2030
13.68 6760 162.4 2080 1990
14.08 6800 156.4 2090 2090
Can anyone help and tell me if my car does have the revo map? and if i have a boost spike problem?
Cheers Craig
as i bought the car and the previous owner mentioned it had been remapped, but i wanted to make sure,
So i bought a Revo Sps 1 to switch the map and off, and decided to do some logs to see if could tell the difference on Meas Bloc "115"
I got told on a earlier thread, to measure the Actual pressue in millibars, and you could see if the car had been remapped.
So today i did 2 runs and 2 logs earlier, and just wondered if you guys could have a look,
Although i do think i have got a boost spike problem, could be hoses collapsing,
This is the log with the SPS switched off in the "standard" map...
RPM Load Absolute Pres. Absolute Pres.
TIME TIME
MARKER STAMP /min % mbar mbar STAMP
0 2920 126.3 1760 1490
0.4 3040 156.4 1790 1830
0.8 3160 151.1 1800 1780
1.22 3320 151.1 1800 1760
1.62 3440 154.1 1810 1780
2.02 3560 154.9 1820 1800
2.51 3720 157.9 1820 1800
2.93 3840 155.6 1810 1810
3.42 4000 157.1 1810 1810
3.92 4160 159.4 1810 1810
4.34 4280 157.1 1810 1820
4.74 4400 157.1 1820 1800
5.23 4560 157.1 1810 1800
5.63 4680 150.4 1800 1820
6.03 4800 154.9 1800 1830
6.45 4920 154.9 1800 1810
6.85 5040 151.9 1810 1830
7.25 5160 158.6 1830 1810
7.65 5240 157.1 1850 1820
8.05 5360 159.4 1860 1840
8.45 5440 155.6 1880 1850
8.85 5560 159.4 1890 1860
9.26 5640 161.7 1910 1870
9.76 5760 152.6 1920 1940
10.18 5880 151.9 1900 1910
10.57 5960 157.9 1890 1910
10.96 6040 169.9 1870 1850
11.37 6120 158.6 1850 1860
11.77 6200 151.9 1820 1870
12.19 6280 152.6 1800 1810
12.67 6400 145.9 1780 1810
13.09 6480 146.6 1760 1760
13.49 6520 142.9 1720 1770
14 6600 131.6 1700 1750
14.49 6680 129.3 1680 1690
14.89 6760 122.6 1640 1720
15.29 6760 121.1 1620 1640
15.69 6840 131.6 1610 1610
16.11 6360 26.3 990 1470
Heres with the SPS swtiched on - "performance map" it does seem to boost alot higher..
RPM Load Absolute Pres. Absolute Pres.
TIME TIME
MARKER STAMP /min % mbar mbar STAMP
0 3160 166.2 2260 1990
0.5 3320 191.7 2270 2540
0.9 3480 191.7 2280 2270
1.3 3600 191.7 2290 2440
1.71 3760 191.7 2310 2270
2.21 3960 191.7 2310 2360
2.61 4080 191.7 2310 2300
3.01 4240 191.7 2300 2310
3.41 4360 191 2290 2290
3.82 4480 191.7 2280 2280
4.32 4680 187.2 2250 2220
4.72 4800 186.5 2240 2220
5.12 4960 188.7 2230 2230
5.52 5080 187.2 2220 2200
5.94 5160 190.2 2220 2240
6.34 5280 189.5 2210 2200
6.83 5440 190.2 2200 2200
7.34 5560 187.2 2190 2200
7.74 5640 178.2 2170 2190
8.14 5760 179.7 2150 2140
8.64 5840 175.9 2120 2140
9.04 5960 172.2 2110 2150
9.45 6040 171.4 2110 2110
9.85 6120 167.7 2110 2100
10.25 6200 182 2120 2030
10.65 6280 173.7 2110 2030
11.05 6320 170.7 2120 2060
11.47 6400 167.7 2100 2110
11.87 6480 163.9 2090 2090
12.27 6520 165.4 2080 2040
12.78 6640 148.1 2070 2150
13.18 6680 155.6 2080 2030
13.68 6760 162.4 2080 1990
14.08 6800 156.4 2090 2090
Can anyone help and tell me if my car does have the revo map? and if i have a boost spike problem?
Cheers Craig
