info on a ibiza cupra

[trotters]

hi there im from edinburgh and looking to buy a ibiza 1.8 20vt very soon

looking at one that is Lowered 50mm on springs an shocks is that really low for this car?

and he says is has been put to 7psi? is this easy to put back or bad for it??
he says its 175bhp? thats **** no?

its yellow is this a bad colour for maching?

 

[DaNnY_LaD]

is a cupra or cupra r?

Yellow is a badger to match up but can be done if the person doing it has experiance ect...7psi on k03 is standard is it not?

 

[trotters]

its not a R

sorry dont no if it standard

some of it had a re-spray and its colour coded

 

[__B3NNY__]

and he says is has been put to 7psi? is this easy to put back or bad for it??
he says its 175bhp? thats **** no?

Its possible it may of had R ecu installed if hes saying 175bhp, a standard R is 180bhp.

7ish psi is a standard cupra + 156bhp.

Or he could be telling you a load of shite full stop.

 

[DaNnY_LaD]

175bhp ? has it been mapped or chipped..U will have to find out ...7psi is standard on a cupra k03 so nothing to worry about...

yeah aslong as the yellow matched up colour coded looks fine then that should be a problem..But yellow is a very easy colour to fade...my bonnet and roof are 2 different colours...Easy to repair tho...

 

[trotters]

its had no re-map

but it 50mm low low
like a pane in ass

 

[__B3NNY__]

if its boosting 7psi its a standard cupra so wont be 175bhp, does it have a boost gauge?

50mm isnt 'low low' lol

 

[trotters]

dont no if it does will ask him next time i chat to him

 

[DaNnY_LaD]

7psi will not be 175bhp more like 156bhp standard.. mines 50mm and it aint low low

 

[trotters]

so what would i need for a re-map what would that take me to 200bhp?

and would i have to run it on v-power standard or re-maped?

 

[Roelích]

200bhp you need FMIC, Stage 1 re-map (can be mapped for standard 95 ron fuel I think), exhaust and filter.