Valentin98

Active Member
Jan 4, 2025
6
4
Hi everyone,

I'm installing a 4-channel HCP4 amplifier, Focal ISU 200 kit, and a 275W RMS JBL subwoofer on my Leon 5F Xcellence (10/2017), and I have a few questions.

I'll get the signal through the high-level jack, connecting it to the front speaker cables (pins 9-10 and 13-14 as pictured).

Does this mean the tweeters won't be amplified since they're on pins 2-3 and 6-7? Could this cause problems?

Is there any coding I need to do after installation?

Thanks for your replies.
 

Attachments

  • IMG_3853.png
    IMG_3853.png
    269.3 KB · Views: 6
  • IMG_3884.jpeg
    IMG_3884.jpeg
    576.7 KB · Views: 5
  • IMG_3882.jpeg
    IMG_3882.jpeg
    467.3 KB · Views: 5
  • 6E2F9C10-8EE6-4C56-BABA-12D9E78AB9DF.jpeg
    6E2F9C10-8EE6-4C56-BABA-12D9E78AB9DF.jpeg
    706.2 KB · Views: 4
  • IMG_3846.jpeg
    IMG_3846.jpeg
    436.5 KB · Views: 4
  • IMG_3881.jpeg
    IMG_3881.jpeg
    56.1 KB · Views: 6
Your infotainment system is outputting 6 channels not 4

If you have Seat Sound then the channels are
Front left high & low
Front right high & low
Rear left high & low
Rear right high & low
Subwoofer
Centre speaker

If you don't have Seat Sound then the channels are
Front left high
Front left low
Front right high
Front right low
Rear left high & low
Rear light high and low


If you don't have Seat Sound you could configure the infotainment unit as if you do, this would combine all the speakers onto 4 channels and give you a dedicated subwoofer output too (you could add a 1 channel amp for this in the future)