Hi guys this is my second seat ive owned so about time to make a rr.
Bought this on ebay in november for £1100 on 83,000 miles with a half decent spec looking abit sorry for itself.
Spec as follows
ko3 now ko3s
Forge TIP
Forge split-r
Unknown frount mount looks like ebay job
Dyna twist induction kit
Race tech silicone piping
4.0 bar fpr
Sai n249 evap air con delete
stage two remap
312mm brake conversion audi tt
fk coilovers
polybushed anit roll bar
polybushed lower arms
auto gauge oil temp
auto gauge 30 psi boost gauge
downpipe unknown
blue flame decat back
black interior.
Got the car home, made some changes straight away, took the LCR splitter off as it was in two pieces and change splitr valve from atmo to recirc.
Also painted the front mount in black to disguise it a little
The car with no splitter and black front mount.
Bought this on ebay in november for £1100 on 83,000 miles with a half decent spec looking abit sorry for itself.
Spec as follows
ko3 now ko3s
Forge TIP
Forge split-r
Unknown frount mount looks like ebay job
Dyna twist induction kit
Race tech silicone piping
4.0 bar fpr
Sai n249 evap air con delete
stage two remap
312mm brake conversion audi tt
fk coilovers
polybushed anit roll bar
polybushed lower arms
auto gauge oil temp
auto gauge 30 psi boost gauge
downpipe unknown
blue flame decat back
black interior.
Got the car home, made some changes straight away, took the LCR splitter off as it was in two pieces and change splitr valve from atmo to recirc.
Also painted the front mount in black to disguise it a little
The car with no splitter and black front mount.
Last edited: