Just done some logs...what do you think?

[Funkyfin2000]

Right then just attempted some runs in the Cupra..

Forge 007, Forge TIP, N249 bypass, P torque Stage 1 map, Milltek cat back exhaust....Piper X Cone Filter and about 6 months ago a new MAF!

Here are the results... on the second run i did have to lift off for a corner slightly so thats why it dips about 5k.......

Run1:

Group A: '003
RPM Mass Flow Load Ign. Timing
TIME
STAMP /min g/s % °ATDC
0.89 1040 16.17 97.3 4.5
2.19 1120 18.92 100 0.8
3.5 1240 20.42 100 3.8
4.7 1360 24.92 100 3
5.88 1480 29.67 100 2.3
7.08 1600 34.11 100 0.8
8.28 1800 40.5 100 3
9.48 2000 48.47 100 4.5
10.89 2280 63.64 100 3.8
12.09 2520 75.39 100 6
13.38 2840 81.28 100 7.5
14.68 3120 94.83 100 9
15.99 3400 102.58 100 10.5
17.19 3680 113.36 100 10.5
18.39 3920 120.42 100 12
19.59 4160 131.53 100 11.3
20.79 4400 138.58 100 12.8
22.2 4680 146.28 100 12
23.4 4840 152.36 100 12.8
24.6 5040 154.47 100 12.8
25.78 5160 4.36 10.2 3.8
27.09 4640 8.89 6.7 14.3
36.77 3480 6.58 5.1 13.5
37.97 3360 6.58 5.1 13.5
39.17 3240 6.31 4.7 13.5

Group B: '115
RPM Load Absolute Pres. Absolute Pres.
TIME
STAMP /min % mbar mbar
1.29 1040 80.5 1330 1090
2.59 1160 84.2 1480 1140
3.9 1280 88 1640 1180
5.08 1400 91 1850 1220
6.28 1520 99.2 2020 1280
7.48 1680 107.5 2090 1400
8.68 1840 117.3 2120 1540
9.88 2080 129.3 2140 1700
11.29 2360 148.1 2150 1960
12.49 2640 156.4 2140 2050
13.78 2920 151.9 2120 1990
15.08 3200 157.9 2110 2020
16.39 3480 157.1 2080 2010
17.59 3760 159.4 2090 2050
18.79 4000 159.4 2080 2050
19.98 4240 165.4 2090 2090
21.19 4480 163.2 2080 2040
22.6 4720 163.9 2040 2020
23.8 4920 163.2 2000 2000
24.98 5040 159.4 1990 1980
26.18 4920 9 990 1200
27.69 4480 9.8 1150 515.13
37.17 3440 9.8 990 1020
38.37 3320 9.8 990 1020
39.57 3200 9.8 990 1020

Group C: '118
RPM Temperature Load Absolute Pres.
TIME
STAMP /min °C % mbar
0.49 1000 32 95.3 1050
1.69 1080 31 95.3 1110
3.1 1200 31 95.3 1150
4.3 1320 30 95.3 1190
5.48 1440 30 95.3 1240
6.68 1600 30 95.3 1310
7.88 1720 31 95.3 1440
9.08 1920 31 95.3 1590
10.39 2160 32 95.3 1790
11.69 2440 33 73.3 2010
12.98 2720 34 70.2 2020
14.18 3000 36 69.8 1970
15.59 3320 37 72.5 2020
16.79 3560 39 73.7 2010
17.99 3840 42 75.3 2050
19.19 4080 45 78 2080
20.39 4320 48 78 2070
21.69 4560 51 80 2040
23 4800 54 81.6 2020
24.2 4960 56 82.7 1970
25.38 5080 57 84.7 1980
26.68 4760 50 0 1080
37.57 3400 42 0 1020
38.77 3280 41 0 1020
40.08 3160 40 0 1020


RUN 2:

Group A: '003
RPM Mass Flow Load Ign. Timing
TIME
STAMP /min g/s % °ATDC
0 1360 23.64 100 3.8
1.41 1520 29.53 100 3
2.61 1720 36.08 100 3
3.81 1920 44.86 100 3.8
4.99 2160 57.11 100 5.3
6.21 2440 69.94 100 4.5
7.39 2720 80.42 100 6
8.59 3040 87.28 99.6 9
9.81 3320 99.33 100 9.8
11.01 3600 107.36 100 11.3
12.21 3880 116.11 100 11.3
13.5 4160 131.69 100 11.3
14.7 4400 136.22 100 12.8
15.9 4640 144.64 100 12
17.1 4840 139.22 66.3 12
18.3 4920 116.25 100 12
19.5 4800 7 5.5 14.3
20.91 4960 152.81 100 12.8
22.11 5240 159.28 100 12
23.31 5440 161.17 100 11.3
24.51 5600 159.89 100 9
25.69 5720 161.03 100 12
26.89 5800 161.56 100 11.3
28.09 5720 5.42 5.1 22.5
29.29 5480 9.56 7.5 15.8
30.49 5120 9.19 7.1 15
31.69 4720 8.47 6.3 14.3
32.99 4360 7.25 5.9 13.5
34.38 4040 7.17 5.5 13.5
35.58 3760 6.64 5.1 13.5
36.78 3440 6.19 4.7 13.5

Group B: '115
RPM Load Absolute Pres. Absolute Pres.
TIME
STAMP /min % mbar mbar
0.4 1400 88 1850 1200
1.81 1600 100.8 2070 1300
3.01 1760 111.3 2140 1450
4.21 2000 121.8 2150 1620
5.39 2240 139.8 2170 1860
6.61 2560 149.6 2160 2000
7.79 2840 150.4 2140 1990
8.99 3120 154.1 2120 2000
10.21 3400 156.4 2110 2020
11.41 3680 159.4 2090 2040
12.61 3920 159.4 2100 2060
13.9 4240 166.2 2090 2130
15.1 4480 163.2 2090 2060
16.3 4680 164.7 2050 2050
17.5 4800 64.7 1380 1370
18.7 4920 40.6 980 1680
20 4760 9 980 1050
21.31 5040 160.2 2010 1950
22.51 5320 156.4 1980 1950
23.71 5520 151.9 1950 1930
24.89 5640 148.9 1910 1920
26.09 5760 147.4 1880 1880
27.29 5840 142.9 1140 1890
28.49 5640 7.5 990 1070
29.69 5400 9 990 1050
30.89 4960 9 990 1050
32.09 4520 9 990 1040
33.4 4240 9 990 1040
34.78 4000 9 990 1040
35.98 3680 9 990 1030
37.18 3360 9 990 1030

Group C: '118
RPM Temperature Load Absolute Pres.
TIME
STAMP /min °C % mbar
0.9 1480 36 95.3 1230
2.21 1640 36 95.3 1350
3.41 1840 36 95.3 1500
4.61 2080 36 95.3 1690
5.79 2360 36 76.1 1950
6.99 2640 37 69 2010
8.19 2920 38 71 1970
9.39 3240 39 72.9 2010
10.59 3480 42 74.1 2030
11.81 3760 45 73.7 2050
13.1 4040 48 76.1 2070
14.3 4320 50 78.8 2110
15.5 4560 53 80.4 2060
16.7 4760 55 80.4 2040
17.9 4880 54 59.2 1630
19.1 4880 51 0 1180
20.4 4800 49 95.3 960
21.71 5160 52 94.9 1980
22.91 5400 54 95.3 1930
24.11 5560 57 93.7 1900
25.29 5680 60 92.9 1920
26.49 5800 63 92.5 1880
27.69 5800 62 0 1370
28.89 5560 56 0 1060
30.09 5240 54 0 1050
31.29 4840 51 0 1050
32.49 4440 50 0 1040
33.9 4160 49 0 1040
35.18 3880 48 0 1040
36.38 3560 48 0 1030
37.58 3280 47 0 1020


The temp outside was about 22 oC

So what kind of power am i giving out...is my N75 knacered

etc etc......

Thanks for looking and commenting!

rich

 

[Essex_Cupra]

I just wish I knew how to log! let alone understand what any of it means!

 

[PhilW]

Can you put CODE around them so we can read them a bit better pleeeease.



Other than that looks ok, meets the requested well, duty cycle looks spot on 95.3 shut to build boost then drops to low 70's then back up as the turbo works harder. MAF looks spot on as well, 161g.s peak.#


No FMIC? 63 degrees intake temps is gettin mighty hot.

Any timing logs?

 

[Funkyfin2000]

CODE?

Hmmm well heres the link to the CSV files might make it a bit easier..

thanks Phil for the info....

Intake Temps are hot then? What will that effect? Heat soak? just slow me down presumably....maybe £800 for a forge FMIC maybe the next thing to do....

http://www.funkyfin2000.f2s.com/log1.csv

http://www.funkyfin2000.f2s.com/log2.csv

What block do i need for timing and what would you get from that?

Also what kind of bhp am i getting or psi?

 

[Forbez]

Right then just attempted some runs in the Cupra..

Forge 007, Forge TIP, N249 bypass, P torque Stage 1 map, Milltek cat back exhaust....Piper X Cone Filter and about 6 months ago a new MAF!

Here are the results... on the second run i did have to lift off for a corner slightly so thats why it dips about 5k.......

Run1:

Group A:	'003			
	RPM	Mass Flow	Load	Ign. Timing
TIME				
STAMP	 /min	 g/s	%	 °ATDC
0.89	1040	16.17	97.3	4.5
2.19	1120	18.92	100	0.8
3.5	1240	20.42	100	3.8
4.7	1360	24.92	100	3
5.88	1480	29.67	100	2.3
7.08	1600	34.11	100	0.8
8.28	1800	40.5	100	3
9.48	2000	48.47	100	4.5
10.89	2280	63.64	100	3.8
12.09	2520	75.39	100	6
13.38	2840	81.28	100	7.5
14.68	3120	94.83	100	9
15.99	3400	102.58	100	10.5
17.19	3680	113.36	100	10.5
18.39	3920	120.42	100	12
19.59	4160	131.53	100	11.3
20.79	4400	138.58	100	12.8
22.2	4680	146.28	100	12
23.4	4840	152.36	100	12.8
24.6	5040	154.47	100	12.8
25.78	5160	4.36	10.2	3.8
27.09	4640	8.89	6.7	14.3
36.77	3480	6.58	5.1	13.5
37.97	3360	6.58	5.1	13.5
39.17	3240	6.31	4.7	13.5

Group B:	'115			
	RPM	Load	Absolute Pres.	Absolute Pres.
TIME				
STAMP	 /min	%	 mbar	 mbar
1.29	1040	80.5	1330	1090
2.59	1160	84.2	1480	1140
3.9	1280	88	1640	1180
5.08	1400	91	1850	1220
6.28	1520	99.2	2020	1280
7.48	1680	107.5	2090	1400
8.68	1840	117.3	2120	1540
9.88	2080	129.3	2140	1700
11.29	2360	148.1	2150	1960
12.49	2640	156.4	2140	2050
13.78	2920	151.9	2120	1990
15.08	3200	157.9	2110	2020
16.39	3480	157.1	2080	2010
17.59	3760	159.4	2090	2050
18.79	4000	159.4	2080	2050
19.98	4240	165.4	2090	2090
21.19	4480	163.2	2080	2040
22.6	4720	163.9	2040	2020
23.8	4920	163.2	2000	2000
24.98	5040	159.4	1990	1980
26.18	4920	9	990	1200
27.69	4480	9.8	1150	515.13
37.17	3440	9.8	990	1020
38.37	3320	9.8	990	1020
39.57	3200	9.8	990	1020

Group C:	'118			
	RPM	Temperature	Load	Absolute Pres.
TIME				
STAMP	 /min	°C	%	 mbar
0.49	1000	32	95.3	1050
1.69	1080	31	95.3	1110
3.1	1200	31	95.3	1150
4.3	1320	30	95.3	1190
5.48	1440	30	95.3	1240
6.68	1600	30	95.3	1310
7.88	1720	31	95.3	1440
9.08	1920	31	95.3	1590
10.39	2160	32	95.3	1790
11.69	2440	33	73.3	2010
12.98	2720	34	70.2	2020
14.18	3000	36	69.8	1970
15.59	3320	37	72.5	2020
16.79	3560	39	73.7	2010
17.99	3840	42	75.3	2050
19.19	4080	45	78	2080
20.39	4320	48	78	2070
21.69	4560	51	80	2040
23	4800	54	81.6	2020
24.2	4960	56	82.7	1970
25.38	5080	57	84.7	1980
26.68	4760	50	0	1080
37.57	3400	42	0	1020
38.77	3280	41	0	1020
40.08	3160	40	0	1020


RUN 2:

Group A:	'003			
	RPM	Mass Flow	Load	Ign. Timing
TIME				
STAMP	 /min	 g/s	%	 °ATDC
0	1360	23.64	100	3.8
1.41	1520	29.53	100	3
2.61	1720	36.08	100	3
3.81	1920	44.86	100	3.8
4.99	2160	57.11	100	5.3
6.21	2440	69.94	100	4.5
7.39	2720	80.42	100	6
8.59	3040	87.28	99.6	9
9.81	3320	99.33	100	9.8
11.01	3600	107.36	100	11.3
12.21	3880	116.11	100	11.3
13.5	4160	131.69	100	11.3
14.7	4400	136.22	100	12.8
15.9	4640	144.64	100	12
17.1	4840	139.22	66.3	12
18.3	4920	116.25	100	12
19.5	4800	7	5.5	14.3
20.91	4960	152.81	100	12.8
22.11	5240	159.28	100	12
23.31	5440	161.17	100	11.3
24.51	5600	159.89	100	9
25.69	5720	161.03	100	12
26.89	5800	161.56	100	11.3
28.09	5720	5.42	5.1	22.5
29.29	5480	9.56	7.5	15.8
30.49	5120	9.19	7.1	15
31.69	4720	8.47	6.3	14.3
32.99	4360	7.25	5.9	13.5
34.38	4040	7.17	5.5	13.5
35.58	3760	6.64	5.1	13.5
36.78	3440	6.19	4.7	13.5

Group B:	'115			
	RPM	Load	Absolute Pres.	Absolute Pres.
TIME				
STAMP	 /min	%	 mbar	 mbar
0.4	1400	88	1850	1200
1.81	1600	100.8	2070	1300
3.01	1760	111.3	2140	1450
4.21	2000	121.8	2150	1620
5.39	2240	139.8	2170	1860
6.61	2560	149.6	2160	2000
7.79	2840	150.4	2140	1990
8.99	3120	154.1	2120	2000
10.21	3400	156.4	2110	2020
11.41	3680	159.4	2090	2040
12.61	3920	159.4	2100	2060
13.9	4240	166.2	2090	2130
15.1	4480	163.2	2090	2060
16.3	4680	164.7	2050	2050
17.5	4800	64.7	1380	1370
18.7	4920	40.6	980	1680
20	4760	9	980	1050
21.31	5040	160.2	2010	1950
22.51	5320	156.4	1980	1950
23.71	5520	151.9	1950	1930
24.89	5640	148.9	1910	1920
26.09	5760	147.4	1880	1880
27.29	5840	142.9	1140	1890
28.49	5640	7.5	990	1070
29.69	5400	9	990	1050
30.89	4960	9	990	1050
32.09	4520	9	990	1040
33.4	4240	9	990	1040
34.78	4000	9	990	1040
35.98	3680	9	990	1030
37.18	3360	9	990	1030

Group C:	'118			
	RPM	Temperature	Load	Absolute Pres.
TIME				
STAMP	 /min	°C	%	 mbar
0.9	1480	36	95.3	1230
2.21	1640	36	95.3	1350
3.41	1840	36	95.3	1500
4.61	2080	36	95.3	1690
5.79	2360	36	76.1	1950
6.99	2640	37	69	2010
8.19	2920	38	71	1970
9.39	3240	39	72.9	2010
10.59	3480	42	74.1	2030
11.81	3760	45	73.7	2050
13.1	4040	48	76.1	2070
14.3	4320	50	78.8	2110
15.5	4560	53	80.4	2060
16.7	4760	55	80.4	2040
17.9	4880	54	59.2	1630
19.1	4880	51	0	1180
20.4	4800	49	95.3	960
21.71	5160	52	94.9	1980
22.91	5400	54	95.3	1930
24.11	5560	57	93.7	1900
25.29	5680	60	92.9	1920
26.49	5800	63	92.5	1880
27.69	5800	62	0	1370
28.89	5560	56	0	1060
30.09	5240	54	0	1050
31.29	4840	51	0	1050
32.49	4440	50	0	1040
33.9	4160	49	0	1040
35.18	3880	48	0	1040
36.38	3560	48	0	1030
37.58	3280	47	0	1020

The temp outside was about 22 oC

So what kind of power am i giving out...is my N75 knacered

etc etc......

Thanks for looking and commenting!

rich

Edited

 

[PhilW]

020 is timing.

You dont get much of a boost spike like most of us get, it seems to be runnig what its requesting. Personally i like the boost spike as it gives you a kick in the arse, which i found better with an N75J.

You spike at about 15psi.

 

[Funkyfin2000]

hmmmm its not running as high boost as i expected then.... some of the stage 1 revo go to 19-20psi.......

so prob about 190bhp then or so???

thanks for editing that, looks good....

what will the timing show?

 

[DPJ]

Yes, I'd have thought 195 bhp tops.

 

[Funkyfin2000]

time for FMIC....milltek sport cat........(presume still passes MOT with this)

and then KO3s and a new map!

ouch sounds expensive when im trying to buy a Cupra R Leon at the same time and pay for a wedding!

 

[David_smith_909]

....milltek sport cat........(presume still passes MOT with this)

 

[nogutsnoglory]

If your getting a forge intercooler now would be a good time
http://www.seatcupra.net/forums/showthread.php?t=124336

 

[Funkyfin2000]

cant afford it at the mo buying a leon cupra r and getting married in july! :S