Just wondering what bhp/torque figures you all have in your LCR's

[kez]

Click here to make a clicking sound

KEZ you fooled me I bloody Clicked it

 

[Mitchy]

Unfortunately this was at the flywheel. I think 2 factors were at play here, firstly the results are "accurate" and not exagerrated

Not another JKM are best supporter

Nothing accurate about stage 2 LCR's getting 245bhp from a starting 225bhp

15-20hp from induction/full exhaust/remap/FMIC/Stage 2 mapping...

I'd be wanting my £3000 back

Yours will be running a good 340hp, mapped LCR's 260hp, stage 2 mapped LCR's 275-280hp.

IMO anyway

 

[richybigman]

245bhp! That's a bit high I got 241.1bhp and yes the .1 is important

 

[speedinsaxo]

JKMs rollers do seem to be a bit low across the board. I jsut got 251 with stage 2/exhaust and was a bit disappointed until I took it on the road - mush more improvement over a stage 1 map.

 

[richybigman]

Well the stage 2 figures on the 180bhp cupra's seem to be spot on, it just seems the LCR stage 2 boys that are losing out.

 

[STEFanGB]

Another question I would like answered is why do people change the exhaust on their LCR's? unless your going Big Turbo (or you like the extra Noise )I have never seen a shred of evidence they give you more than 5bhp (and they cost up to £1100)

Some of them have reasons, for exaple mine fell off... (Bugger) So I went for S/S Supersprint so don't have to worry about rust any more.. (((

 

[Blelock]

I have 269.6 bhp and 308.4 lbs/ft

Graph show the car standard (red solid line - BHP, blue solid line - torque) and after remap etc (red dashed line - BHP and blue dashed line - torque)

 

[lofer]

What map is that? Peak power is produced under 5000rpm!

 

[Blelock]

What map is that? Peak power is produced under 5000rpm!

Peak BHP at 5k revs! Its a custom map.

 

[lofer]

4976 rpm.......... thats under 5000 right? Its just that I thought mapped lcr’s kept on pushing till 5.5k?

 

[Blelock]

4976 rpm.......... thats under 5000 right? Its just that I thought mapped lcr’s kept on pushing till 5.5k?

ok just uner 5000rpm. I dont know about mapped lcr's pushing till 5500rpm. I just know I am happy with the way mine goes lol

 

[GREY 225]

[/IMG]

 

[Oliveracc]

LCR rolling roaded at Star Performance - 278hp/277lbft torque. I have the dyno graph here but don't have a digital camera handy. Full list of mods:

Star Performance Remap
Samco Intercooler and Induction Hoses
Forge Dump Valve
Front & Rear Eibach Anti-Roll Bars
Koni Frequency Selective Dampers
Custom made stainless steel exhaust
Powerflex Dog-bone Mount

 

[cupra_brown]

240 bhp and 285 lb torque.

Remap + green panel filter

Done at clive attlowe tuning on there new RR.

Pretty accurate as i done it on a RR day and everyone was happy with there results

 

[Si]

My figures are in my sig. Thats with just Samco hoses and remap.
http://www.westover.org.uk/si/power/si.pdf
http://www.westover.org.uk/si/RR6/J18SPC.pdf

The car has hit this figure twice on the same road 10 months apart.