k&N ???

[Ringyyyy]

will my cr run ok with a k&N 57i induction kit on it ????

 

[The MoffMeister]

no best off with green filter much nicer to your maf

 

[D.K]

I would'nt use a filter that needed oiling as i'v been told it srews up the MAF
Others may have different opinions .
I think your better off with an enclosed fillter if your after better performance aswell

 

[edmong]

Had my 57i fitted for a couple of months now and no problems. The trick is when you go to oil the filter DONT plaster it and dont do it to often! this would then not hurt your MAF.

 

[Ringyyyy]

when you bought the 57i did it come in a kit, (with breather pipe and jubile clips ect) also i have a set of samco hoses will the cone fit on the end ????

 

[edmong]

when you bought the 57i did it come in a kit, (with breather pipe and jubile clips ect) also i have a set of samco hoses will the cone fit on the end ????

No breather pipe (not needed). Had the clips. Ive just bought the samco (red)induction hose for mine. The MAF goes into that so it fits.

Sounds awesome at low revs.

How much you paying? I can point you in the right direction of a K&N dealer to the southwest, I got mine from him.