how do you mean? the tooth that you mount he plate to? i cut that off ages ago when it was black
Thats it mate, was it a pig to get out? also, what front mount is that? Im looking at a forge one but will be a couple of months for that money!
-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
LCR front bumper mod ideas, what you got?
- Thread starter c6hut
- Start date
-
- Tags
- bumper front ideas mod seat leon cupra r
Thats it mate, was it a pig to get out? also, what front mount is that? Im looking at a forge one but will be a couple of months for that money!
front mount was bought off a mate who now sells them on ebay, and then i custom made the rest,
dont get me wrong the forge one is well made bit of kit, but my god its expensive for what it is and doesnt replace ALL the pipework like a custom one would, just as theirs comes up on the cold side it hits
that piece of pipe and its very restrictive closes down to less than 2" in places, so im supprised that wasnt removed in the 700+ pound kit. just my opinion tho but i saved 500 quid on that and that bought my map.
up to you
dont get me wrong the forge one is well made bit of kit, but my god its expensive for what it is and doesnt replace ALL the pipework like a custom one would, just as theirs comes up on the cold side it hits
that piece of pipe and its very restrictive closes down to less than 2" in places, so im supprised that wasnt removed in the 700+ pound kit. just my opinion tho but i saved 500 quid on that and that bought my map.
up to you
You guys that have custom made your piping have you used Forge I/C's or different ones as im liking the look of the custom pipework just thinking of where i can get it made and is it alot of hassle measuring the angle of the bends and stuff. As like Rick says my Forge pipe is alittle squashed but not massively doesnt effect the flow that much.
Rikko
Rikko
I followed what RickC fitted to his.
This is the same sized intercooler we used.
http://cgi.ebay.co.uk/NEW-Front-mou...14&_trkparms=72:1299|66:2|65:12|39:1|240:1318
This is the same sized intercooler we used.
http://cgi.ebay.co.uk/NEW-Front-mou...14&_trkparms=72:1299|66:2|65:12|39:1|240:1318
front mount was bought off a mate who now sells them on ebay, and then i custom made the rest,
dont get me wrong the forge one is well made bit of kit, but my god its expensive for what it is and doesnt replace ALL the pipework like a custom one would, just as theirs comes up on the cold side it hits
that piece of pipe and its very restrictive closes down to less than 2" in places, so im supprised that wasnt removed in the 700+ pound kit. just my opinion tho but i saved 500 quid on that and that bought my map.
up to you
Has your mate got any listed on ebay at present? Does that restrictive pipe have a name? Iv been looking on another thread about fmic and like the look of your intercooler and the pipework that crazyshed has used. Has either of you had any logs done?
Cheers
yeah it was done a while ago and the max knock was 1 whilst giving it death, and could easily be run on boost 9 timing 9 due to the inlet temps being so cold, anove on crazyshads car was how mine looked in my pics but the pipework was reworked and is close to the chassis as possible, this allows for more space and fitting of the fog light grills also reduces quite alot of pipework. the pipe above i call the MAP sensor pipe, i made into this
one oullet for the dv and one for the MAP sensor
the size i have is 24'' x 12' x 3'' with 2.5'' pipework
one oullet for the dv and one for the MAP sensor
the size i have is 24'' x 12' x 3'' with 2.5'' pipework
Similar threads
