leon cupra r brembos on ibiza

[Willow86]

What do u have grind them down for?

 

[turboholic]

i wanted them to fit in the standard wheels but they're too big so im gonna have to get some 17's

 

[turboholic]

does anyone know if i can get away with running ibiza cupra r 305 discs, and lcr brembos (grinding down the carrier where it bolts to the caliper)? would standard wheels then fit?

 

[Willow86]

I've got the same problem there is a bloke on eBay that sells the smaller carrier to fit the Ibiza Cupra r discs but they are for a Porsche caliper but can't give me a straight answer, I've had a look at cutting them down myself but you ain't got anything to drill the new holes in

 

[turboholic]

Theres no need to drill new holes. Just grind down the carriers

Sent from my GT-I9305 using Tapatalk 2

 

[neron4o]

Sorry for using your thread....
I'm running icR with Brebmo brakes,std 305mm discs x 28mm min thikcness, I want to put 323mm x 28 mm from lcr,but I remember Bill( badger 5)said, the dics are diff offsets. I cant find his post,so may question is theres some way to make those lcr discs fit??? I am with 17"rims- 15mm spacers in front.

 

[turboholic]

You will need 9mm spacer between the caliper and carrier to fit the disc in diameter wise. Then you will need the carrier machined down for the offset of the lcr disc. Then depending on the et of your wheels you may need spacers

Sent from my GT-I9305 using Tapatalk 2

 

[Neil82]

I've got the same problem there is a bloke on eBay that sells the smaller carrier to fit the Ibiza Cupra r discs but they are for a Porsche caliper but can't give me a straight answer, I've had a look at cutting them down myself but you ain't got anything to drill the new holes in

Can you give me a link to these on ebay

 

[turboholic]

not sure if these would be of any use.......??

http://www.ebay.co.uk/itm/160995485103?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

machine 9mm off the carrier to caliper face and that should be fine? not sure about the offset though