Here's my pioneer head unit
Bet you got the new version of this or the one with built in sat-nav
oh no with all respect it cooler than that
struggling now, climate control in. just trying to get the headunit itself in and SECURE! I presume i do away with any brackets that come with the pioneer unit and using the screw that hold the pioneer brackets on screw the mk4 golf surround to the headunit inside?
iv put the rubber bung on the back of the stereo with slots into the ring on the back on the seat console holding it in the right place and seems to stop it moving further in or up and down./ I just need to work out how to mount the unit so it doesnt come OUT when driving.???
iv put the rubber bung on the back of the stereo with slots into the ring on the back on the seat console holding it in the right place and seems to stop it moving further in or up and down./ I just need to work out how to mount the unit so it doesnt come OUT when driving.???
Oh ok I think i got you now. so that is a bolt that goes through everything, has a a piece of metal as a washer wish have a nut on the side of the head of the bolt
you will need a washer on the inside too. the nut at the very top is to tighten the bolt as the ones i got were slot heads and it was hard to work a screwdriver on them. this is a rough digram of the way i did it
red is the stereo, black = the mk4 golf adaptor, blue = the dash, green = washers, silver = nuts and purple = the bolt
t
red is the stereo, black = the mk4 golf adaptor, blue = the dash, green = washers, silver = nuts and purple = the bolt
t
ye sort of mate, i am just still trying to finish electrics before its all completed.
...and by electrics i only have the bypass for the parking brake to sort out iv wired it up but not working? :s also umming an aring about rear view (or any view) camera
...and by electrics i only have the bypass for the parking brake to sort out iv wired it up but not working? :s also umming an aring about rear view (or any view) camera
you will need a washer on the inside too. the nut at the very top is to tighten the bolt as the ones i got were slot heads and it was hard to work a screwdriver on them. this is a rough digram of the way i did it
red is the stereo, black = the mk4 golf adaptor, blue = the dash, green = washers, silver = nuts and purple = the bolt
t
10/10 for the art work.
oh no with all respect it cooler than that
Is it cooler than this, pisses over my head unit and does everything.
I done the software bypass for the handbrake
haha cheers. I think!!
nice!Is it cooler than this, pisses over my head unit and does everything.
Deleted member 12147
Guest
Is it cooler than this, pisses over my head unit and does everything.
This is my next big mod, ive got a spare centre console to butcher up. I'm gonna wait til the iPad 3 is released though before I make mine. I wanna integrate mine in the dash but make it removeable.
Last edited by a moderator:
-B-
Guest
There is a Double Din centre console on eBay UK right now.....
http://www.ebay.co.uk/itm/390361851697
I'd go for it but I'm going to do it the hard way and convert my single din console with manual heater controls.
http://www.ebay.co.uk/itm/390361851697
I'd go for it but I'm going to do it the hard way and convert my single din console with manual heater controls.
Similar threads
