Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
http://vagoc.co.uk/vb/showthread.php?t=238
From yet another thread full of failure, some hard facts at last!!!
NEW improved loom 03G971033L @£82.28
injector 03G130073TX @£556
Old part numbers, just so you can cross reference, this info came from Audi Hatfield.
loom 03G971033D
injector 03G130073MX
The old loom: Part number suffix 'D' dropped on 01/04/2008 and changed to suffx 'L' according to ETKA.
Mine failed yesterday (56 plate FR) dealer who have serviced car from new have confirmed no. 2 injector faulty, but warranty wont cover wiring loom.
After reading this thread I have contacted Seat UK who have agreed to contact dealer to instruct wiring loom to be replaced.
However they will no longer recommend all other injectors being replaced (this has apparently come from the factory) as there is no proof that more injectors will fail, after everything I have read on here and elsewhere that doesn’t fill me with confidence. They are to instruct the dealer to complete a safety check on the other injectors which should identify if they are to fail, not quite sure how that will work
Any ideas how to proceed ? I really want them all changed I don’t want the car to fail with my wife driving with the kids in the car
My cars a 58 So should have the new parts from factory then![]()
77 aye? you shouldnt have a problem with a car 17yrs from the future![]()
In that case the flux capacitor will be more of a worry than the injectors .......![]()