Light grey upholstery - Wet 'n Dry extraction

Jim@WD

Active Member
Hi all, something a little different for you today..

This was a very last minute booking through a friend for his BMW 318 compact. A nice break from the norm, as, this was an Interior only detail.

Product
• 303 aerospace protectant (UV protection for dash/plastics etc)
• AutoSmart G101 (all purpose cleaner)
• AutoSmart Bio Brisk (interior/upholstery cleaner)
• Warm water!

• Lots of microfibre cloths
• Meguiars triple action detail brush
• Meguiars Slide-lock brush
• Various detail brushes
• VAX 6131 wet ‘n dry hoover
• Vikan upholstery brush


I’m trying to think of more products.. but, honestly, I think that was it!


Anyway, here are a series of before pics.

DSC06904wd.jpg


DSC06905wd.jpg


DSC06907wd.jpg
DSC06908wd.jpg



Nice soiling on the passenger seat:

DSC06906wd.jpg


DSC06932wd.jpg



First job was to remove any clutter (..There was none!) and hoover.

In removing the floor mats though, I had to laugh. Look at the difference in the colour of the dirty and ‘clean’, carpet.

DSC06911wd.jpg



The mats had seen better days; made for a great turnaround though.

DSC06912wd.jpg



Ok, so.. Bio-Brisk was applied via spray bottle and the carpet pile was agitated with an upholstery brush. A couple of slow passes with water extraction were made closely followed by several more passes removing the water. A final scrub/dry was given with a MF.

A 50/50 on the passenger mat.

DSC06914wd.jpg
 

Jim@WD

Active Member
Again, a good wipe around was given with a clean microfibre to help remove any remaining residues.


Moving on to the seats now, a similar process was used as above but, extra care taken making sure the material didn’t get too wet.

More dirty water collected after the seats were vac’d.

DSC06935wd.jpg


(..You just don’t realise, do you?)


After all the ‘wet-work’ was complete, I equipped a few brushes and attacked the dash/centre-console and door cards.

50/50 attempts..

DSC06938wd.jpg


DSC06940wd.jpg


DSC06941wd.jpg



The lot was given another quick hoover out (as was the boot area) and the plastics were treated to 303 aerospace protectant.


Drivers foot-well before and after:

DSC06904wd.jpg


DSC06952wd.jpg


DSC06951wd.jpg



And a few final afters.

DSC06942wd.jpg


DSC06944wd.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Saw this on cleanyourcar :) Stunning work as usual Jim.

VAX 6131 wet ‘n dry hoover is really good. What made you get it over the v020 model?