Light steering

[depresion]

I took it upto 5 then couldn't resist going for a quick drive round the block, not that a residential street is the place to test it.

 

[S13]

I printed this thread out and took it to the VW dealer today.

Got the car hooked up and it turned out that my steering code was 10121 instead of the 00121 as stated above?

Any ideas?

 

[depresion]

I was woundering if anyone knows what the other numbers are for.

 

[yannis]

Another way to improve the feeling of the steering is to upgrade to cupra silent blocks perhaps?

 

[Chemical Al]

I printed this thread out and took it to the VW dealer today.

Got the car hooked up and it turned out that my steering code was 10121 instead of the 00121 as stated above?

Any ideas?

was just an example of what you need to change, wasnt ment to be the exact number although i new it would be quite similar

they needed to just change the 2 for 5 so 10121 (code read from your car) to 10151

 

[Triple D]

It might just be me being thick, but it wont let me change my settings , i recode them to 5 like someone stated in the first page, then click do it, and it still stays the same can someone give a vag com amature some help or advice please thanks
Spanny

 

[gazjones]

is yours really light mate? mine is really heavy as you noticed last monday! ive not looked into this as mine may need lightening a bit

 

[Chemical Al]

you using a full version of vag com? shareware version may not do it

 

[Chemical Al]

also you are changing the correct digit yeah ?

 

[Triple D]

its 311.2n iirc

 

[Mattyh87]

Shareware does do it for me! I use the shareware v.409.1 for VAGCOM.

 

[Triple D]

also you are changing the correct digit yeah ?

yep, its exactly the same as the guy that posted before 10121

 

[Chemical Al]

so hit recode, change the 2 for a 5 and hit save

 

[Triple D]

save doesnt come up, it just says do it, so i click on that, and then it starts to get all the green writing up and the steering code still reads the same, 10121 or what ever it is

 

[Triple D]

you click on steering assist, then on recode, change the code from a 2 to a 5, but then there is also another code below that, do i need to change that at all? after i have changed it from a 2 to a 5, what do i do then? click on do it? as no save button comes up :S

Or do i have to go into control modual finder? then put the code in for the steering and then change it?

 

[Chemical Al]

save/do it = same thing

brb, ill pop and change mine

 

[Triple D]

cheers mate, much appreciated, i feel like a right retard as i cant even change the steering

 

[Chemical Al]

How to adjust steering weight....

connect to moduel... (steering assist)

hit coding...

change the 2 for a 5 anh click do it

HTH

 

[Triple D]

cheers chap, will have another shot later, as im going out for a meal now. Much appreciated

 

[Chemical Al]

no probs, just check there is no faults too