-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
200 quid for an intercooler and all plumbing, not exactly going big budget!
I like it!
What kinda power we talking with one of those bolted to it?
Where would map it?
Is it a 1.6 or 1.8?
I like it!
What kinda power we talking with one of those bolted to it?
Where would map it?
Is it a 1.6 or 1.8?
Running 5psi of boost they don't think it needs an IC, should add about 40bhp so with decat it'd be ~165bhp?
http://www.mx5mad.com/begisturboindex.php?osCsid=fd2aa14a0ca2be430949160430156859
Garret based turbo systems in the UK, from £1200. I think that's my plan for when i graduate....
Garret based turbo systems in the UK, from £1200. I think that's my plan for when i graduate....
Well the no modding lasted a little bit...
I fitted my corbeau bucket a few weeks back, which gave me a little more space to move.
But today I've picked up a stainless steel exhaust, and decat. bit of a faff to get the old system off with 18yr old nuts - so I ended up grinding a couple off.
Fitment was so easy though. exhaust & decat supplied with new gaskets, nuts & bolts. All the joints are 'flanged' so mate up lovely. Never had it so easy with SEAT exhausts!
Decat has certainly helped, a little bit tinny at the moment as it needs coking up a bit, but that & the increase in bore overall seem to have really helped!
Roll cage is next though, having seen some crashed images recently it 'needs' to be done.
MOT on Friday though, so it'll probably fail on some minor bits.
I fitted my corbeau bucket a few weeks back, which gave me a little more space to move.
But today I've picked up a stainless steel exhaust, and decat. bit of a faff to get the old system off with 18yr old nuts - so I ended up grinding a couple off.
Fitment was so easy though. exhaust & decat supplied with new gaskets, nuts & bolts. All the joints are 'flanged' so mate up lovely. Never had it so easy with SEAT exhausts!
Decat has certainly helped, a little bit tinny at the moment as it needs coking up a bit, but that & the increase in bore overall seem to have really helped!
Roll cage is next though, having seen some crashed images recently it 'needs' to be done.
MOT on Friday though, so it'll probably fail on some minor bits.
Need to change the clutch first... seems that popping the clutch mid corner to promote some rear wheel steering has taken it's toll a bit.
On the seat front.
When looking at westies I came across these
http://www.jkcomposites.com/
Alot of the taller westie drivers use them so could be good in an mx.......if they fit.
When looking at westies I came across these
http://www.jkcomposites.com/
Alot of the taller westie drivers use them so could be good in an mx.......if they fit.
12 months ticket acquired today... it had failed on slight welding, and some sillies.
Nearside handbrake was 'inefficient' so I buggered about - and ended up just needing to adjust it.
I even got my wife to pick me up from work after she collected it from the MOT place so I could drive it home
Nearside handbrake was 'inefficient' so I buggered about - and ended up just needing to adjust it.
I even got my wife to pick me up from work after she collected it from the MOT place so I could drive it home
Similar threads
