MAF Log

[keany19]

Just done a MAF log while driving round my estate, at 5400 revs the mass air was 150.81 does this sound about right?

Can post the log if anyone wants to see it

 

[Damoegan]

Did you do a proper power run? (from ~2.5k to red line with foot flat on the floor in 3rd or 4th gear)

 

[keany19]

not yet, will do though when it drys up, only went round the estate to see wha sort of readings i was getting!!

 

[keany19]

2000 rev in 3rd gear to redline then redline in 4th - Opions???

TIME      Rev      Load  Inj on Time  Flow    TIME    Idle S    Idle S    Idle S    Idle S
STAMP	 /min	%	 ms	 g/s	STAMP	 CF	 CF	 CF	 CF

19.07    	1760	25.6	2.38	8.14	18.57	0	0	0	0
19.88    	1840	52.6	4.76	19.78	19.47	0	0	0	0
20.88    	2080	87.2	8.5	38.67	20.4	0	0	0	0
21.79    	2400	116.5	11.22	60.67	21.29	0	0	0	0
22.59    	2800	148.9	14.62	85.81	22.19	0	0	0	0
23.4    	3240	148.9	13.94	94.67	23	0	0	0	0
24.2    	3720	152.6	14.28	105.78	23.8	0	0	0	0
25.12    	4200	151.9	14.28	120.53	24.6	0	0	0	0
26.01    	4680	149.6	14.62	133.14	25.52	0	0	0	0
26.81    	5040	150.4	14.62	144.11	26.41	0	0	0	0
27.63    	5480	146.6	14.28	159.47	27.23	0	0	0	0
28.43    	5840	154.1	14.96	173.39	28.03	0	0	0	0
29.23    	6200	149.6	14.62	175.42	28.84	0	0	0	0
30.04    	6480	139.1	13.6	170.22	29.63	0	0	0	0
30.84    	6720	118	11.22	159.69	30.44	0	0	0	0
31.66    	6880	59.4	5.44	59.36	31.26	0	0	0	0
32.46    	5440	146.6	14.62	170.61	32.06	0	0	0	0
33.35    	5680	157.1	15.3	169.11	32.95	3	3	3	0
34.27    	5880	152.6	14.62	172.25	33.87	3	3	3	0
35.08    	6080	145.9	14.28	172.25	34.67	2.3	2.3	2.3	0
35.98    	6240	145.9	14.62	170.53	35.56	1.5	1.5	0.8	0
36.78    	6360	135.3	13.94	165.81	36.38	0.8	0.8	0.8	0
37.67    	6520	135.3	14.62	165.5	37.29	0.8	0.8	0.8	0
38.49    	6600	138.3	14.96	163.53	38.09	0	0	0	0
39.39    	6680	121.8	12.24	161	38.91	0	3	0	0
40.2    	6680	29.3	2.38	29.64	39.8	0	3	0	0
41.02    	6480	15	0	16.86	40.6	0	0	0	0
41.8    	6160	12	0	15.36	41.4	0	0	0	0
42.62    	5680	12.8	0	13.61	42.2	0	0	0	0

 

[DJ-LIAMC]

Seems fine for a standard map, but better results in 3rd for some reason 175 g/s peak

 

[Damoegan]

Can you post them with code tags next time..

 

[keany19]

There ya go damoegan, worked a treat! cheers for the tip!!

 

[JamJay]

Keany, do you have the full version of V-C or just 409.1 and a cheap cable to do this?

 

[keany19]

just 409.1 and a cable off ebay. Trying to find a serial number for VAG COM so I can do boost logging too.

 

[JamJay]

Well that's one thing out of the way although I want to do boost logs too. I guess you need the full version for that?

Do you happen to have a link to the ebay shop where you bought it?

 

[keany19]

http://cgi.ebay.co.uk/409-1-KKL-USB...ment?hash=item4143dbb5de&_trksid=p3286.c0.m14

theres one. just go on ebay and search for vagcom diagnostic and loads will come up

 

[Damoegan]

Air flow look ok and minimal timing pull.

 

[keany19]

just need to get a map on it now and take some new logs to see the difference