mk4 fr upgrades

[nickshally]

i is there a website or something where i can buy mk4 ibiza cupra alloys,body kits,brakes etc for the mk4 fr 1.8t?

 

[joe_ibiza]

if there is it has been hidden very very well! i'm still looking

 

[malky39]

i would say thats what you dealer is for or ebay

 

[Tom.]

Be very lucky to find any of the cupra parts going cheap or second hand. If you do your very lucky.

Your best bet is get them through the dealers if your willing to pay through your anus.

 

[Gooner_Mike]

Your best bet is to mod the car you have and not try to make it look like a Cupra as proper Cupra bits are expensive. You would be much better off spending your money on suspension and engine mods to start with.

 

[Damoegan]

Give David @ Sere Motors - NI a PM, he can do you a good deal on mk4 cupra wheels.

 

[berzerker_ibiza]

i would say thats what you dealer is for or ebay

this has nothing to do with this topic at all just that i haven't yet found out how to PM people yet??????

but was going to ask if you were at halfords in paisley today about 5

 

[Damoegan]

You need 15 posts first.

 

[Gooner_Mike]

What reg is your FR?

 

[malky39]

this has nothing to do with this topic at all just that i haven't yet found out how to PM people yet??????

but was going to ask if you were at halfords in paisley today about 5

No i wasnt and i hope my car wasnt as it is of the road just now and sitting outside the dealers

 

[spidermonkey]

i is there a website or something where i can buy mk4 ibiza cupra alloys,body kits,brakes etc for the mk4 fr 1.8t?

Surely after you buy up all the kit and get it fitted, it would've been just as cheap to get a Cupra?

Keep it a standard looking FR so us Cupra owners can retain our 'exclusivity'

 

[berzerker_ibiza]

No i wasnt and i hope my car wasnt as it is of the road just now and sitting outside the dealers

ach well never mind

 

[nickshally]

i dont want to just buy a cupra as they cost more and the insurance is higher lol.

 

[L14M_T]

out of curiousity how much are the front and rear cupra bumpers? do they come primed or prepainted?

 

[ChrisBowe82]

Just a quick word to anyone planning on changing their front FR bumper to the cupra one; The cupra bumpers have their foglights on a solid panel and were designed to go with the Cupra's front intercooler, wheras the FR has a sidemounted intercooler (Fr bumper is designed for this, as there is plenty of air flowing trough the O/S foglight grill section.) If you're planning on upgrading to the Cupra front bumper, the O/S foglight/panel needs removing so the FR's side intercooler has a supply of fresh air -or you can duct the air through.

Just a heads up if you're new to the site and haven't seen anything about this yet.

CLICKY--->http://img162.imageshack.us/img162/4927/smicif9.jpg