Try Performance Creations for mudflaps. I take on board previous comments regarding fitting rally type mupflaps to your pride and joy, however, personal choice. I have fitted these, totally flexible and do the job in protecting your car. Various grades of material aviailable, and logos. In fitting these I did take the wheels off, makes it easier and did give me the chance to thoroughly clean my wheels. However, I beleive that these can be fitted without removing the wheels.
Same as 5door (front)
Sent using my fingers
Was that to an ST? If so can the rears be fited as provided or do they need adapting? I'm figuring that the rear arches are different to those on the hatch. Do they come pre-drilled? Grateful for any tips from your experience with them.
Leon ST FR 1.4ACT 2014
Not an ST, I am not aware that that the rear wheel arches are any different on an ST, however SEAT can confirm. They come pre-drilled and use the existing Torx fittings for the arch liners, in the same positions,so there is no drilling required.The inboard fixings, to secure the mudflaps, require a spacer, provided, and self tapping screws, provided, which locate into the inner plastic arch liner. The underside brackets fit to the existing Torx fixings, securing the lower arch liner under the car. Very easy to fix, full instructions and photo type diagrams are provided. Hope this helps. These mudflaps are much lower than the rigid plastic ones as the SEAT approved mupflaps and do occassionaly rub on bumps and speed restriction humps, however as they are totally flexible, no problem, and as they are lower, they offer more protection to your pride and joy.
Anyone knows the PN for mud flaps to be used on a ST FR ?
Fitted mudflaps on my Cupra
Why did you not fit the RallyFlapz to the rear? I've been prevaricating for ages as I'm unsure regarding the rear fitting on an ST - must sort it out.
Leon ST FR 1.4ACT 2014
Why did you not fit the RallyFlapz to the rear?
Rears not available for the ST. A ST owner should pay them a visit...
That should work with an assortment of self tapping wood/plastic screws to find suitable mounting positions. I wasn't too keen on the rally look from the rear, want the car to blend in somewhat...Maybe I'll take that chance and see if I can get the rears supplied undrilled and adapt them.