Neuspeed or h and r anti roll bar

[Haughan]

Any one use either of them the h and r one is cheap but is it a go as the neuspeed one as not mega different in price

 

[PhilW]

Go with neuspeed.

If you wanted to replace the bushes on a H+R front youd be looking at the cost of nearly the whole kit. Shocking.

 

[Prebs]

+1 for Neuspeed

Have bin runningn the neuspeed for years and is a great uppgrade. Only problem I´ve seen is that the clamps with bushes on the rear beam did move back and forth after running hard on track. This happend nomather how hard the clamps was tightened. I did come up with a solutioen to this by applying some heavy cable-ties on each side (dobbeled) of the clamps. Problems solved!

 

[Chambers_CUPRA]

+1 For neuspeed

I run both and have a spare set of L brackets for fitting the rear one you need to buy which are extra

 

[ibizacupra]

H&R cheaper and decent quality.. no less than neuspeed

 

[Haughan]

What do I need to fit the rear then andys there a big difference made to the handling

 

[ibizacupra]

ARB, drop links & brackets
28mm rear arb will dramatically change the turn in..

 

[Haughan]

Are they difficult to fit and do they come as a kit or do you buy it all separate

 

[ibizacupra]

from H&R they wont come complete with stuff to fit an ibiza no... nor will neuspeed.

I make adaptor brackets which convert to ibiza's.. The kits are mk2 golf arb's.. no one loves ibiza's it seems

except a few of us