Obdeleven issue

[rourkemason]

So I’ve been messing with an OBDEleven and stupidly just realised when I indicate left now, both FRONT indicators flash. I have no idea how I’ve done this and I’ve even tried to look through leuchte0 but still no luck. Any help would be greatly appreciated

 

[Jokke]

Go to "my car" then "history" and retrace your steps.
Leuchte 1 is your right indicator and Leuchte 0 is your left. "links" in german is left and "rechts" is right in german. So i would check Leuchte 1 your right indicator to see if you have one of the settings with "links", then just set it to "rechts"

 

[rourkemason]

Hi, thanks for the helpful response! I did check these to be fair but no they are respectively correct. I checked just and I don’t think when I signal right that my front right bulb even flashes, it’s only when I indicate left that both front bulbs appear. So that’s an issue

 

[Jokke]

Hi, thanks for the helpful response! I did check these to be fair but no they are respectively correct. I checked just and I don’t think when I signal right that my front right bulb even flashes, it’s only when I indicate left that both front bulbs appear. So that’s an issue

So check Leuchte 0, light_function_a_0 should be blinkenlinksaktiv. Leuchte1BLK should have light_function_a_1 blinkenrechtaktiv.

If those are right, I have no clue whats wrong, you could make a back up file of central electrics and post it and maybe some can go threw it. If not im afraid you will have to check the history.

When I messed with Leuchte to get hellphase on my ibiza, I noticed that changes to the rear turn signal had some weird effect to the front. I have no clue why, but I had to change the rear to hellphase for the front to work.