Ovni Yellow Ibiza Sport PD130 -Hybrid Turbo, BBS RK 504's

Mar 19, 2010
1,324
3
Hi , Im new to the seat scene and got to say im impressed by the ibiza ive recently purchased.
Im currently progressing through tidying it up considering I picked it up cheap and in need of abit of work.

This is how I picked it up:
08032010294.jpg

P1642_18-03-10.jpg

P1639_18-03-10.jpg

P1643_18-03-10.jpg
-bonnet looks as though its been keyed and laquer peeling (will get it in for respray)

Currently Ive been doing abit of work tidying it up Alloys /brake calipers / hubs / and front struts...


Alloys (top after , bottom how it was before)
P1655_19-03-10.jpg


Im looking at getting some bbs ch replicas off ebay , does anyone know if 18 inch will fit in my ibiza nicely ?

Hubs cleaned up (abit rusty so cleaned down and primed):

P1335_28-03-10.jpg

P1522_28-03-10.jpg

and yes i did remove all wet paint from rubber :p

Carriers primed and done yellow:
P1543_28-03-10.jpg


Strut cleaned up and primed:
P152201_28-03-10.jpg



this is it so far , more info and pictures to come as i go on doing bits and bobs with this little project ive aquired and hopefull will be mint when im done.
 
Last edited:

Altech

Ibiza PD170
Oct 3, 2007
1,996
0
London
Carriers primed and done yellow:
P1543_28-03-10.jpg

:lol: That's the best use that i've seen for an old wheel barrow.

Looks like a nice car, I'm sure I recognise it from somewhere.

18" wheels can be fitted to Ibizas. You'll have to run 35 profile tyres but your car will look like a monster truck if you don't lower it, then your arches will need some work so that the wheels won't scrub. I personally think 17" wheels are large enough.
 
Mar 19, 2010
1,324
3
Ye the wheel barrow was at the bottom and I thought why not use it haha.

and the car has been in my area (cumbria) for a while , got traded into my cousins garage and I just thought it would be a good second car to move to.
Just needs abit of work and effort put into it. mechanically engine wise its sound

and I might hunt for some bbs ch 17" if they exsist , like the look of them alloys in black
 
Mar 19, 2010
1,324
3
Ye replicas will do , not to keen on the alloys that are on it. where can I find these replicas ?
 

Altech

Ibiza PD170
Oct 3, 2007
1,996
0
London
I think I saw some on ebay a while ago. They were a 5x112 fitment which won't fit an Ibiza without messing about with adaptors
 
Nov 25, 2007
1,892
0
Derby
thats what i need to do with mine strip it down and paint strutts and hubs but need the car every day which is rubbish

iv got the 130 crackin car [B)]
 
Mar 19, 2010
1,324
3
Ye what i first thought id do, replacing all brakes too.

I see youve got yours to 174 bhp ? how do you go about getting them figures and at what cost ?
cheers , Glenn
 
Nov 25, 2007
1,892
0
Derby
best bet is

panel filter £40ish
160 air intake £50ish
front mount £500ish
de cat £15ish
exhaust £180ish
remap £400ish

all a big guess but round there i think prices chaged since other people on hear will help you out alot mate

another thing if you goin for discs and pads might be worth swoppin the calipers for 312mm ones
 
Mar 19, 2010
1,324
3
ok , seems like abit of a cost towards getting them figures then eh... will be looking into it in future

and the alloys look really smart , im looking to find some multispokes that arnt chavvy and will be subtle.
 

Altech

Ibiza PD170
Oct 3, 2007
1,996
0
London
ok , seems like abit of a cost towards getting them figures then eh... will be looking into it in future

and the alloys look really smart , im looking to find some multispokes that arnt chavvy and will be subtle.

My Ibiza is running at 170 bhp and 300 ftlbs torque. Even though I've got a larger air intake, panel filter and a modified exhaust, you should be able to get near those figures with a standard Ibiza just by remapping it. My remap cost £225 from P-Torque and I can highly recommend it :)

There are quite a few OEM alloys that suit Ibizas. Octavia vRS alloys are very popular and so are Audi TT comps.
 
Nov 25, 2007
1,892
0
Derby
iv got a set of 5 spoke leon wheels that might be up for sale soon there yellow at the min check my thread you will see them there
 

Mattwood

Active Member
Mar 7, 2009
370
0
Nr Southampton
they will be goin back silver theo

DSC00285.jpg

If they had tyres i would practically rip your arm off for them!!

Nice clean looking car dude - hope to see some more pictures as it progresses :)

As for achieving 174bhp - P-Torque stage 1 and a pipercross panel filter = £295 :D Although i will be going for an FMIC as soon as
 
Mar 19, 2010
1,324
3
Managed to do abit more work today

P1610_02-04-10.jpg


got strut and new spring on driver side , unfortunatly the ABS sensor ... well I think it is one snapped at the pins that go into the hub... Anyone know where I can buy a replacement ?

As for the other strut , someone who had done the springs previously had lost pretty much all the bearings from the top of the strut ... need to buy more to replace.

P1631_02-04-10.jpg


And i also sprayed up the brake calipers silver.

thats it for now , hopefully will have more done this weekend
 
Mar 19, 2010
1,324
3
Re: Ovnia Ibiza Sport PD130 Project!

Update....

Not posted anything for a while as ive been waiting on bits and bobs but...

got new abs sensor in and give the hub a real good coat of paint.
hub.jpg


also started refurbing the alloys

Rubbed down alloy :
hub1.jpg


2 coats of acid etch primer :) :

hub2.jpg


going to spray the alloys black on the edges to match the middle as I thought the wheels looked tacky with silver edges
 
Genuine SEAT Parts and Accessories.